MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Ditto on September 14, 2015, 01:36:44 pm
-
Hey guys
Do you know if OPS is available via the Mk5 canbus as it was in the mk6? I.e. if I were to fit a radio with the radar display, would this work?
It's a 2007 model, which i believe has a different canbus version?
Thanks
Matt
-
At least since the L revision CAN Gateways are compatible with OPS sensors. You'll need to replace all the sensors and fit a new sensors ECU of the mk6 generation. Carsystems.pl sells the full kit (rear, front, front and rear).
-
Thanks Shoduchi
So as I suspected the standard sensors on the mk5 do not feedback to the canbus? Only the newer versions do?
Cheers
-
I think the Can Bus is the least of your problems. The mk5 sensors shouldn't have the technology required to work with the OPS ECU. You need to upgrade the whole system. I have both my Golfs with OPS front and rear, by the way. :wink:
-
I think the Can Bus is the least of your problems. The mk5 sensors shouldn't have the technology required to work with the OPS ECU. You need to upgrade the whole system. I have both my Golfs with OPS front and rear, by the way. :wink:
who said so? It's a lie. OEM parctronics works fine with OPS, only "OEM" cobra ones, don't work.
-
I think the Can Bus is the least of your problems. The mk5 sensors shouldn't have the technology required to work with the OPS ECU. You need to upgrade the whole system. I have both my Golfs with OPS front and rear, by the way. :wink:
who said so? It's a lie. OEM parctronics works fine with OPS, only "OEM" cobra ones, don't work.
Are you saying that mk5 sensors work just as fine as the mk6's sensors with the OPS ECU that show the graphics in the RNS/RCD-510? The OEM sensors are Bosch and their shape is different. IIRC connectors and loom are different.
I'm just selling the story as I was told by my friend who fitted the sensors. :confused:
-
Thanks for the info guys. To clarify, the unit inside the boot is Bosch and the sensors look as follows
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi304.photobucket.com%2Falbums%2Fnn161%2Fdittouk%2FA1%2FIMAG1006_1_zpslnm527nn.jpg&hash=1a2ce42ca98a10f0d8d926060e05ee70659ab3b4)
-
I got the rear OPS kit from China for £85 odd. I have the sensors fitted and painted but haven't had a chance to get the wiring installed yet. Everything is there though.
-
Think the answer can be found here, looks like as Shoduchi suggested only the OEM mk6 Valeo ones will work; http://www.r32oc.com/topic/22301-optical-rear-park/page__st__30
-
I think the Can Bus is the least of your problems. The mk5 sensors shouldn't have the technology required to work with the OPS ECU. You need to upgrade the whole system. I have both my Golfs with OPS front and rear, by the way. :wink:
who said so? It's a lie. OEM parctronics works fine with OPS, only "OEM" cobra ones, don't work.
potentially this may be true as its the parking ecu that sends the signal to the can bus for the stereo to display.
so vw may have introduced a parking ecu made by bosch that's compatible with old sensors but ops connects to the powertrain can bus and not the convenience can bus which the mk5 has as standard.
its just sometimes easier to fit the Valeo sets which will work no problem for people without sensors
with regard to original post, 1 your oem wiring is connected to wrong can bus for ops
2 I don't know of a bosch parking ecu that supports ops
3 changing to valeo sensors isn't a 5 min job as your sensor holders being OEM will be plastic glued to the bumper not necessarily stuck with double sided foam like they should be, the bosch holders don't hold the valeo sensors you'll have to change them.
quick cost for the job say 200 with the kit
-
Hi Si
Thanks for the detailed response :happy2:
Sounds a lot of work to retrofit! Was only interested as many of the aftermarket stereos boast this functionality along with other features. As you say, this must be down to the difference in canbus on the 5 vs 6.
Cheers