MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: blueislander80 on May 16, 2017, 01:15:45 pm

Title: Rear Brake Disc Shield - remove and replace?
Post by: blueislander80 on May 16, 2017, 01:15:45 pm

Right, so the rear right brake disc shield is rotten, has sheared off and is making a hell of a noise - my local garage is going to hopefully cut it away and get it off tomorrow - not sure if that can be done just with some cutting or if bits and bobs need removing first?

Second question - I can't find anywhere that sells a replacement heat shield for the brakes? I also read it isn't really necessary to have them - is that right? I assume it basically deflects heat and protects from road debris?

Title: Re: Rear Brake Disc Shield - remove and replace?
Post by: andy7ven on May 16, 2017, 04:38:49 pm

You need to actually remove the brakes and wheel hub to remove them... Mine need replacing but I ain't wasting £££ on having it done to be honest...

TPS will have them, I don't think they're needed but might be wrong...

Title: Re: Rear Brake Disc Shield - remove and replace?
Post by: strongbow on May 16, 2017, 07:05:51 pm

cant remember who but someone on the forum told me to cut them off with tin snips,cutting pieces away at a time,and adventually pulled off due to the rust,annoying noise solved and only replaced due to needing new rear bearing 2 years after.

Title: Re: Rear Brake Disc Shield - remove and replace?
Post by: r5gtt on May 16, 2017, 11:16:28 pm

On the subject and hope op doesn't mind?

Can I get dust shields for the bigger 350mm onward discs?