MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: robokn on June 01, 2010, 09:12:25 am
-
Well after suffering quite a few months of juddering every time I pressed the brake I decided to bin the Alcons and fit these mothers
Needed a little work to fit but nothing Darren and the boys and G-Werkes couldn't handle so here they
RS6 V10 390mm six pots
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg91%2Frobokn%2FIMG00158-20100524-1216.jpg&hash=e5840f5b4824f9016756c49e641df68a5934fe9d)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi54.photobucket.com%2Falbums%2Fg91%2Frobokn%2Fd619bea8.jpg&hash=516f7c519cbfd3b396f6d154ac622d669e15eb06)
And yes those are 19's, they work suberb, no more juddering
-
390mm :surprised: :surprised:
i think is safe to say you now have the biggest brakes on the forum :notworthy:
-
very sweet brakes :congrats:
-
i thought they were only 374mm discs on the rs6
-
Maybe on the old one but not on the new one :wink: :wink:
-
Well after suffering quite a few months of juddering every time I pressed the brake I decided to bin the Alcons and fit these mothers
Needed a little work to fit but nothing Darren and the boys and G-Werkes couldn't handle so here they
RS6 V10 390mm six pots
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg91%2Frobokn%2FIMG00158-20100524-1216.jpg&hash=e5840f5b4824f9016756c49e641df68a5934fe9d)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi54.photobucket.com%2Falbums%2Fg91%2Frobokn%2Fd619bea8.jpg&hash=516f7c519cbfd3b396f6d154ac622d669e15eb06)
And yes those are 19's, they work suberb, no more juddering
May i ask what work was needed to make them fit the mk V platform?? Spacers? Specific wheel ET? :popcornsoda:
-
what are consumables costs then. cant imagine discs that size being cheap. Also how heavy are they etc
-
Work Required
A small amount of machining of the caliper to get it to fit 5mm no structural integrity affected
A 2mm spacer behind disc to center it on the pads
So not a lot of work they are Sportec rims not sure on the off set but you will need 19"s minimum
The whole kit is 2k and as for the consumables cheaper than Alcon
-
:notworthy: Looks. Fcuking. Awesome.
-
if you go for the RS6 b7 discs with RS4 calipers you dont need to do any machining and they JUST fit under team dynamic 1.2s (18")
as per this setup... costly but :drool: :drool: :drool: :drool: :drool:
http://cgi.ebay.co.uk/Complete-Gloss-White-Audi-RS4-Front-S3-Rear-Brake-Kit-/150447906773?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item230764dfd5
-
Why go that small they are almost the same size as V6 brakes :grin:
Now these fit straight on and exactly how I wanted them BIG and Powerful
-
:drool: :drool: :drool: :drool: :drool:
-
Mate they are proper big brakes, they could stop a bus lol
-
Hubba bubba :drool:
-
What happened to the TT Rob?
-
Nothing why do you think there is something wrong a=or are you looking into the future :laugh: :laugh: :laugh:
-
Jesus christ! You'll be pulling endo's with them on :surprised:
-
:grin: :grin:
-
Nothing why do you think there is something wrong a=or are you looking into the future :laugh: :laugh: :laugh:
Someone mentioned the MK5 platform so tht you'd had a change! :rolleye: :wink:
-
Well after suffering quite a few months of juddering every time I pressed the brake I decided to bin the Alcons and fit these mothers
Needed a little work to fit but nothing Darren and the boys and G-Werkes couldn't handle so here they
RS6 V10 390mm six pots
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg91%2Frobokn%2FIMG00158-20100524-1216.jpg&hash=e5840f5b4824f9016756c49e641df68a5934fe9d)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi54.photobucket.com%2Falbums%2Fg91%2Frobokn%2Fd619bea8.jpg&hash=516f7c519cbfd3b396f6d154ac622d669e15eb06)
And yes those are 19's, they work suberb, no more juddering
Christ, what are you stopping? the space shuttle! :laugh: