MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: dajonic on September 07, 2010, 10:08:55 pm

Title: 130 PCD onto a 112 PCD
Post by: dajonic on September 07, 2010, 10:08:55 pm

Lots of lovely Porsche wheels but in the wrong stud pattern, so how do you get them to fit?

Title: Re: 130 PCD onto a 112 PCD
Post by: MattPoss on September 07, 2010, 10:23:31 pm

Adapters (depending on the offset of course) ..............

http://www.performancealloys.com/alloy_wheels_adaptors.asp (http://www.performancealloys.com/alloy_wheels_adaptors.asp) :happy2:

Matt

Title: Re: 130 PCD onto a 112 PCD
Post by: yin on September 07, 2010, 10:25:25 pm

http://www.venommotorsport.com/manufacturer_product.php?manufacturer=FK&category=wheel&product=PCDs&make=VW&model=Golf%20Mk%205
 :happy2:

Title: Re: 130 PCD onto a 112 PCD
Post by: dajonic on September 07, 2010, 10:32:32 pm

Thank you Matt and Yin :notworthy:

Title: Re: 130 PCD onto a 112 PCD
Post by: Teutonic_Tamer on October 16, 2010, 08:45:33 pm

Quote from: MattPoss on September 07, 2010, 10:23:31 pm

Adapters (depending on the offset of course) ..............

http://www.performancealloys.com/alloy_wheels_adaptors.asp (http://www.performancealloys.com/alloy_wheels_adaptors.asp) :happy2:

Matt

Erm . . . they are NOT road legal.  They are just meant for show cars.  Very dodgy to use on a road car!

Title: Re: 130 PCD onto a 112 PCD
Post by: Gordy on October 21, 2010, 01:16:09 pm

The H+R ones are good adaptors and can be used on the road as are TUV approved etc.