MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: daz5182 on December 10, 2010, 02:43:29 pm

Title: Fitting OEM front splitter
Post by: daz5182 on December 10, 2010, 02:43:29 pm

Any ideas or how to's please, got a complete GTi front splitter to replace my GT one.

Cheers

Title: Re: Fitting OEM front splitter
Post by: daz5182 on December 15, 2010, 10:04:51 am

anyone please?

Title: Re: Fitting OEM front splitter
Post by: Gene Hunt on December 15, 2010, 11:38:49 am

Could be done at home if you have some ramps,screws/bolts go a fair bit under & it's tight with the car on the level.Better to have it on a ramp which i did when i had it serviced & changed it then. :smiley:

Title: Re: Fitting OEM front splitter
Post by: edd666999 on December 15, 2010, 12:37:38 pm

if you get under the car its quite easy, just a few screws and plastic clips from what i remember.

Title: Re: Fitting OEM front splitter
Post by: mjt on December 15, 2010, 04:19:41 pm

if you change it anychance of pictures or  as i would like to do this too thanks

Title: Re: Fitting OEM front splitter
Post by: daboy3000 on December 15, 2010, 04:47:54 pm

Or, take the bumper off, replace the splitter and put it back on!

Title: Re: Fitting OEM front splitter
Post by: daz5182 on December 15, 2010, 05:43:03 pm

gonna attack it this weekend and get you guys a how to guide!

Thanks for your help folks