MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: Betty02 on January 04, 2011, 02:16:13 pm
-
Really wanting an R32 rear end, only thing putting me of is the only exhausts for the GTi that I can find with the right style tail pipes is he milly.
Now all I have on the GTi now is the standard exhaust and it sounds good enough for me, little grunt but nothing stupid and nice on tick-over.
My question is how does the milly compare to the the standard GTi one in the noise department?
Really didn't want anything louder then standard to be fair! Even if I just get the back box will the tone chance?
Thanks in advance!
Simon
-
Get the milltek resonated option, nice and quiet but still sounds good, not a massive amount louder than standard until higher RPM or with some aggressive mapping.
-
I swapped my standard exhaust for a milly, with a resonated midsection and could hardly tell any difference to be honest.
The millteks do look good, even when I had the non res the noise was not too overpowering either really.
Go for it!!!
-
I have just done this and went for the resonated miltek. not too loud but slightly louder than what Eddy was standard. some pics in members rides - beccas edition 30
-
I had a non res Milltek on my last mk5 GTI & i'm glad i went non res, not much louder than standard system & in fact i would say the res one is not as loud as the standard system?.
-
Been looking at the price of the milly and trying to compare it to the blueflame -
http://www.blueflameperformance.com/cars_english/blueflame-car-exhausts-1/vw/golf-mk5-gti-edition-30-2004/vw-golf-mk5-gti-edition-30-2004-on-76mm-rear-tail-pipes-twin-4-00-trims-with-brace-bar-bftrim010-r32-style-centre-exit.html
This is a twin 4" though, but the price is considerably cheaper, guessing this price is just for a backbox and will bolt straight on? What noise/performance or any issues with the above?
Any pictures of one would be appreciated
Thanks
-
Been looking at the price of the milly and trying to compare it to the blueflame -
http://www.blueflameperformance.com/cars_english/blueflame-car-exhausts-1/vw/golf-mk5-gti-edition-30-2004/vw-golf-mk5-gti-edition-30-2004-on-76mm-rear-tail-pipes-twin-4-00-trims-with-brace-bar-bftrim010-r32-style-centre-exit.html
This is a twin 4" though, but the price is considerably cheaper, guessing this price is just for a backbox and will bolt straight on? What noise/performance or any issues with the above?
Any pictures of one would be appreciated
Thanks
Not to sure what it is you would be buying there, a cat back is normally a lot more than that. :chicken:
In reagrds to the blueflame versus milltek dilemma. I have a turbo back centre exit Blueflame and it is loud at times, especially when slightly hot it goes quieter when blasting round a track for some reason. If you want a quiet system i would say avoid Blueflame, but the problem with the Milltek R 32 style one, is the quality is sh*t compared to the blueflame one it hangs down below the valance on a funny angle showing off all the rusty bits and is really heavy. Ask JoesGTI he is happy to admit that his was poor compared to the Blueflame. But the Milltek one can be nice and quiet when you want it to. :happy2:
-
Can that blueflame setup (£160?) be integrated into the standard gti setup? As I want to get a proper system (eventually when I've got enough money!) but thought this could tide me over untill then as id like to get the r32 rear fitted.
-
I think that is just a price for the tips, if you wanted the centre exit you would ned a cat back system to bolt onto your original GTI one. :happy2:
-
I have given up on my Milltek for exactly the same reason as Joe did , the back hangs down so far,have heard that there is a shallower milltek one that you can get, but not seen any yet.
I have a pipeworx high flow one, bought it off an edition 38 member for £150 (though they are £450 new) and it sounds great, though may put some better tailpipes on it. It fits to my milltek downpipe without any issues, and isn't overly loud, but does sound quite powerful when you want it to, and also when reversing onto the drive late at night :ashamed:
-
I have given up on my Milltek for exactly the same reason as Joe did , the back hangs down so far,have heard that there is a shallower milltek one that you can get, but not seen any yet.
....I've been running Milltek's shallow backbox on mine for over a year - I have R32 rear with ceramic coated black quads. No probs on the build quality either and I've run Millteks for 85k miles.
-
....I've been running Milltek's shallow backbox on mine for over a year - I have R32 rear with ceramic coated black quads. No probs on the build quality either and I've run Millteks for 85k miles.
Yours may be a different build design to mine was Robin as you have the 4 exhausts. I was gutted as I had done a fair bit of reviewing of these exhausts (yours included) so was gutted to see how that little thing let it down, especially when everything else about it was so well done.
-
^^^^
Yes, my Milltek is custom built.