MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: johnhol78 on May 03, 2011, 02:54:03 pm
-
Does anyone know any companies that rent workshop/ramp space per day?
Would really help taking the precat out of my car?
West London/Bucks/Middlesex area
:happy2:
-
you can get to all 4 bolts and the 1st lambda sensor by removing the airbox/engine cover. then under the car just remove the 2 bolts that support the hangers and loosen the exhaust sleeve so it slides backwards, 4 bolts for the aluminum cradle piece and then the 2nd lambda. all done quite easily from drive-on ramps.
-
as above its easy on the drive :smiley:
-
Right the steps to remove 4 bolts and the 1st lambda sensor sound easy enough though the "2 bolts that support the hangers and loosen the exhaust sleeve so it slides backwards, 4 bolts for the aluminum cradle piece and then the 2nd lambda"
Does anyone have pictures of these parts?
Happy to have a go myself on the drive - got axle stands and drive on ramps - even though the front splitter hits it first....
Might jack it up then plave the ramp under the wheel.....then lower onto ramp.
-
Also do I need new gaskets for when I replace the downpipe?
-
Does anyone know any companies that rent workshop/ramp space per day?
Would really help taking the precat out of my car?
West London/Bucks/Middlesex area
:happy2:
Check this place out mate, they are in Park Royal
-
What place?
-
What place?
ooopps forgot to paste the link in
here you go http://www.pitstartgarage.com/
-
What place?
ooopps forgot to paste the link in
here you go http://www.pitstartgarage.com/
That is a f'kin good idea. Shame I live in Aberdeen :sad1:
-
There's a few of these type places dotted about. A chap I know who's up the top end of the country (Durham way) has used a similar place in his area.