MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: jordychris on October 29, 2011, 04:13:15 pm
-
I have just had 2 vreds fitted to the front on 18" monzas what pressure does everyone find best to run them at
-
Should be about 33-34PSI.
-
I thought Vreds were supposed to be higher pressure eg 41psi?
-
That is why i am confused
-
I thought Vreds were supposed to be higher pressure eg 41psi?
No, I remember someone contacted vreds asking this question and their response was to run them as per vw spec.
I run mine around 2.3-2.4 bar. Vw recommend 2.2 but I've always found tyres wear far better at the marginally higher pressure.
-
I thought Vreds were supposed to be higher pressure eg 41psi?
..............on there ''official'' web site they do recomend high pressure?. I stick with the VW recomended pressure & they have handled/worn perfect. :happy2:
-
If it's at what VW recommend, surely its 2.6bar or 37psi?
-
I run them higher, around 41PSI. Find they can be understeery otherwise.
-
41PSI sounds a lot. More likely to get understeer with more pressure in the front tyres.
-
i was told by a Vredestein dealer to run 40 PSI and have done on both sets i have used up, and have experianced balanced tyre wear on all tyres with no handling issues.
-
How do they hold up under light to moderate braking Steve??? :popcornsoda:
-
41PSI sounds a lot. More likely to get understeer with more pressure in the front tyres.
It's more of a vagueness on turn it. The grip very well so putting more air in them tends to give crisper turn in feel.
I'm on my third set now and I'm not sure they're a tyre I'll buy again. The PS3s I tried were definitely worth the additional cost.