MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: Rich666 on January 31, 2012, 02:06:51 pm

Title: MAF
Post by: Rich666 on January 31, 2012, 02:06:51 pm

Anyone know if the part numbers for an RS4 maf sensor? need one for my project, is it the same as an R32? breaking one at the moment so can hang on to it if it fits. Thanks - Rich

Title: Re: MAF
Post by: Teutonic_Tamer on February 03, 2012, 02:11:19 pm

I'd doubt you'd need an RS4 MAF - my throttle body and inlet trunking are about the same diameter as the Mersey Tunnel!  :evilgrin:

And the RS4 uses a totally different engine management system to the R32 - it has TWO ECUs with a direct bridge - though the actual signal from the MAF should be the same.

I'll dig the p/n for you - but it may be superceeded, as I havn't updated my ETKA for about a decade!

(I'll come back and edit this post after ETKA boots . . . . de-dum, de-dum, de-dum)

OK, the actual sensor isn't listed separately - you have to get the MAF housing too - 077 133 471 M.