MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Hurdy on May 19, 2009, 09:57:05 pm
-
Well I decided to fit the EVOM's intake myself. It arrived this afternoon and so I downloaded the "How to..." and immeditaely came across some problems that aren't on it.
The write up is a K03 write up and so doesn't have the take off pip like the ED30. Getting the pipe off to the turbo is like 3rd degree torture trying to get in there. Then came the fitting of the EVOMS.
The shield around the intake pipe didn't fit for three reasons
1. I have a Forge diverter valve and associated piping is in the way
2. I have extra wiring coming across the fusebox for both the headlights and the sound system
3. I have aftermarket headlights which protrude further into the aibox area
So, I've had to "remodel" the shape of the airbox shield.
I then fitted the downpipe and after I had done this found that the MAF housing slopes downwards and so you cannot get it in unless you fit the MAF first and then fit the downpipe.
Next up, the OEM screws that hold in the MAF in the OEM housing do not fit in the EVOMS....WTF!!!
At this stage I was due out to dinner as it is the Missis's birthday tomorrow.
Hopefully all will be well tomorrow.
PS....I'm taking plenty of pics in case anyone wants a PROPER write up of a K04 EVOMS on an ED30 :happy2:
Rant over
-
There is a carbonarioroao one for sale on here, though its provisionally sold. :signLOL:
-
Sazza frazza razzam TC :angry015: :grin:
-
sound like youve been having fun john! :grin:
do they not make one specific for KO4?
-
sound like youve been having fun john! :grin:
do they not make one specific for KO4?
Yes, the one I've ordered is specific to the K04. Unfortunately for me, I have a few mods in the engine bay which get in the way of the EVOM's ...specifically
Part of the take-off for the Forge DV piping
My rear section of the aftermarket headlight housing encroached into the engine bay further than stock (Hacksaw FTW!!!)
Circuitry for the headlights and for the power cables to the amp and head unit were nestled in the gap for the EVOM's shield.
However, the good news is that I finished it this morning and so here is the completed article.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fhurdy_album%2FEVOMS_INTAKE%2FEVOMSINTAKEPICSweb.jpg&hash=3d48aeda41773197ced243954dbd960bea26e3bc)
Took it out for a test drive and so far no CEL. :happy2:
Talk about an induction noise and turbo chatter on the overrun :jumping:
I totally agree when they say it sounds like Darth Vader under your bonnet :laugh:
The test run revealed that the take off is a little less hectic - so some torque has gone at the lower end?!?
Also revealed that the top end is even more frenetic - There is an extra surge towards the redline that wasn't quite as pronounced as before - even better when added to the higher redline change-up......STEVE PG :wink: :wink:
I'll have to try and jump the queue at the Superchips RR day now!!! :evilgrin:
-
^^^ I am going to ban you soon :signLOL:
-
Very nicely done Mr Hurditch!, im thinkin would be good to see that animal on the rollers, im sure there may be a drop out or perhaps go disguised as Neg as it looks like he's sold his motor :smiley:
-
^^^ I am going to ban you soon :signLOL:
You know you want to :wink:
£335 for all that extra lovely top end power :chicken: :jumping:
-
Very nicely done Mr Hurditch!, im thinkin would be good to see that animal on the rollers, im sure there may be a drop out or perhaps go disguised as Neg as it looks like he's sold his motor :smiley:
Fingers crossed. :smiley:
I've added my name to the list of runners, but there are at least 3 ahead of me. :sad:
-
^^^ I am going to ban you soon :signLOL:
You know you want to :wink:
£335 for all that extra lovely top end power wear n Tear :chicken: :jumping:
ill just run along and get my coat :laugh:
-
^^^ I am going to ban you soon :signLOL:
You know you want to :wink:
£335 for all that extra lovely top end power wear n Tear :chicken: :jumping:
ill just run along and get my coat :laugh:
Don't you fancy the DSG remap Mr Mcavity?
-
oh mate, ive spent well over a grand in the past 2 weeks so im pushing my luck mate! :laugh:
Seed firmly planted though mate :happy2:
-
Looking good mate. :happy2:
Do you still have the original intake thingy that sits at the front as it looks a little strange without one?
Not sure if there are any positives or negatives with it but I thought it made it slightly more airtight from when I had one on my Octavia.
I was a little suprised about the loss of torque as well, perhaps it just goes on for so long now its not so noticable. :laugh:
-
Hi Hedge,
I do have the original air intake that goes at the front, but I was thinking of doing something more custom as the stock one looks a bit knackered.
-
I think I have a spare if you wish to experiment.
-
nice one John , the extra noises you explain have me sold already :laugh:
Steve/Phil DSG remap is a no brainer and cheap (relatively) :evilgrin:
-
Don't you start as well :laugh: :laugh:
-
A quick sound bite of the wastegate flutter. :evilgrin:
Turn it up as the induction sound nearly drowns it out :laugh:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi156.photobucket.com%2Falbums%2Ft8%2Fhurdy_album%2Fth_EVOMSINTAKEPICS026.jpg&hash=ebeeb6dcba62e56cb79162be19c66c5f157e4b9c) (http://s156.photobucket.com/albums/t8/hurdy_album/?action=view¤t=EVOMSINTAKEPICS026.flv)
-
^^^ I need one of these in my life just for that sounddddddddddddd :party: :party: :party: :party: :party: :party:
-
Ooh for the sound of wastegate chatter :party: :party: :party: :love: :party:
-
Hurdy are the pipes on the EVOMS metal or plastic?
I need an intake, I love the psst the stock car makes but its a little quiet in my book.
-
The pipes on my Octavia were plastic. I am guessing the Edition 30 pipes will be the same material.
-
Wooooooh! Sounds like a 90's Escort Cosworth WRC! :happy2:
Need that in my life!! :jumpmove:
-
Hurdy are the pipes on the EVOMS metal or plastic?
I need an intake, I love the psst the stock car makes but its a little quiet in my book.
The top pipe across the engine bay is plastic. The MAF housing and downpipe are alloy :happy2:
-
Wooooooh! Sounds like a 90's Escort Cosworth WRC! :happy2:
Need that in my life!! :jumpmove:
There's a guy over on golfgti.co.uk who has just had his on for a week and taken it off. You may well get it at a knock down price if you ask quickly Nath.
**don't tell anyone though** :wink:
-
Hurdy are the pipes on the EVOMS metal or plastic?
I need an intake, I love the psst the stock car makes but its a little quiet in my book.
The top pipe across the engine bay is plastic. The MAF housing and downpipe are alloy :happy2:
Just to clear it up (cause when I was reading the spec on the EVOMS kits a while back I was a little shocked how they are charging this much for one and yet they are using plastic pipework.)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv486%2Fdpaz%2FEVOMSamended.jpg&hash=74109b863651c28aecf4a8e04a5487368118192f)
Red = Alloy/Aluminium Downpipe Section
Blue = Plastic
Then theres just the headshield section which is also alloy?? Am I right?
-
The heatshield is stainless steel, but doesn't seem to fit on mine as there is other pipework in the way!
Currently trying to get a CF one made. :innocent:
-
Wooooooh! Sounds like a 90's Escort Cosworth WRC! :happy2:
Need that in my life!! :jumpmove:
There's a guy over on golfgti.co.uk who has just had his on for a week and taken it off. You may well get it at a knock down price if you ask quickly Nath.
**don't tell anyone though** :wink:
Im in! :happy2:
Doesn't say whether he's KO4 or not though? :confused:
-
Did you get me email Mr Greenous about some other intake options??? :wink:
-
Did you get me email Mr Greenous about some other intake options??? :wink:
Ooh yes I did! :wink:
Wasn't really planning on gettin one but at the right price I may be interested. This one was KO3 so a no goer!
-
Did you get me email Mr Greenous about some other intake options??? :wink:
That with reference to the BSH kits? We still need to get that off the ground, cause they are great kits!
-
^^^ Nope, I have given up with BSH the guy just doesn't return emails :angry015:
This time it's a company based here :smiley:
-
Okay, well I'd be very interested SteveP :drinking:
-
I'm thinking about an EVOMS on my K03 GTI... what happens with the MAF?
-
I'm thinking about an EVOMS on my K03 GTI... what happens with the MAF?
....The MAF is physically incorporated in the EVOMS kit. Or have I misunderstood your question?
EDIT: I should have written what gaz wrote :rolleye: :stupid:
-
I'm thinking about an EVOMS on my K03 GTI... what happens with the MAF?
you unbolt your original MAF from your engine cover, then bolt it into the new intake tubing, EVOMS or any other variety :happy2: