MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Rob. on May 29, 2013, 09:46:53 pm

Title: Ignition live location for aftermarket stereo?
Post by: Rob. on May 29, 2013, 09:46:53 pm

Trying to get my Kenwood KIV-700 installed in the Jetta before the 5hr drive to Devon on Friday night...hopefully I've got a fuse tap turning up tomorrow, and I've run the ignition live from the stereo loom to the fuse box.

Anyone got any pointers on which fuse to tap into? I've read about 5 conflicting suggestions (and a similar number of different fusebox diagrams). My multimeter is at my parents house, so I'm a bit stuck for testing.

Have any of you guys wired an aftermarket head unit, without the CANBUS loom?

Thanks.

Title: Re: Ignition live location for aftermarket stereo?
Post by: dokez on May 30, 2013, 12:04:43 am

Purple and black/grey wire behind the headlight switch is 1

Title: Re: Ignition live location for aftermarket stereo?
Post by: Rob. on May 30, 2013, 07:42:11 pm

Right, I've piggy backed onto the fuse for the cigarette lighter (kept pulling fuses until my phone charger in the socket didn't light up)

My connects2 loom is connected, but the head unit still won't power on. Head unit fuse is fine, and the unit was working fine before I removed it.

I'm stumped!

Title: Re: Ignition live location for aftermarket stereo?
Post by: Rob. on May 30, 2013, 07:47:00 pm

http://m.flickr.com/photos/78981894@N03/8893094299

Title: Re: Ignition live location for aftermarket stereo?
Post by: Andyf on June 01, 2013, 02:25:16 pm

what connects2 loom are you using?

is it the same as this?
http://item.mobileweb.ebay.co.uk/viewitem?index=0&sbk=1&nav=SEARCH&itemId=350516807987

you dont need a switched live if you are the box doew all the work