MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Scuba on December 21, 2013, 07:57:03 pm
-
Hello everybody the below error showing on my GTI 2007 .as i can see that most of the people having this issue is related to DV .i have already replaced the PCV 4 months ago and today i have removed the DV which is in good shape but revision c . any idea what should be the next part to check
2 Faults Found:
008801 - Boost Pressure Control Valve (N249)
P2261 - 008 - Mechanical Malfunction - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 2
Fault Frequency: 3
Time Indication: 0
Date: 2000.00.00
Time: 18:52:35
Freeze Frame:
RPM: 2244 /min
Load: 11.0 %
Speed: 45.0 km/h
Temperature: 85.0°C
Temperature: 31.0°C
Absolute Pres.: 1020.0 mbar
Voltage: 13.589 V
001089 - EVAP Emission Control Sys
P0441 - 002 - Incorrect Flow - MIL ON
Freeze Frame:
Fault Status: 11100010
Fault Priority: 2
Fault Frequency: 1
Time Indication: 0
Date: 2000.00.00
Time: 12:58:05
Freeze Frame:
RPM: 762 /min
Load: 14.9 %
Speed: 0.0 km/h
Temperature: 88.0°C
Temperature: 33.0°C
Absolute Pres.: 1020.0 mbar
Voltage: 13.462 V
thanks
-
First error message will be your DV replace that.
I you also get a incorrect pressure or exceeded pressure.
Your N75 has failed.
For your P0441 error, replace the N80 valve with new revised hose from N80 to line that's goes to the charcoal canister.
-
As described DV fault. Underboosting. Get new DV and your sorted. I use k04 rev.g DV. Not sure if C is the one wit rubber diaphrame..prone to fall apart. Located on your turbocharger.
-
i took pictures for the DV when i remove it ,i took it out and checked the diaphragm and the rubbers look fine no scratch or crack it is opening and closing properly as well.
is it possible that the DV gives such error even if the diaphragm look good? here attached the pictures(http://[img][img])[/img][/img]
-
i am not able to attach the pictures any idea how
-
http://www.mk5golfgti.co.uk/forum/index.php/topic,945.0.html
-
Try to remove it and do your output test on that solenoid valve. To see if it closes when energized. Might strugle to close. But I would put my money on it, that if you fitt a newer rev. It will get your boost issue cured.
-
here we go attached the pictures
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fab283%2FScuba88%2FDSC_1747_zpsc91a9af9.jpg&hash=32c4721596afac781da7ac54a56c64875d0d384d)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fab283%2FScuba88%2FDSC_1746_zps6b56ffb7.jpg&hash=fa2591434085c660d781e81ef3d7c70bf4a65dfc)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fab283%2FScuba88%2FDSC_1745_zpsfbb5d5cc.jpg&hash=dd64846ba19a61d187069d8c9e00d9700cbe1797)
-
It's not that we don't believe you when you say it's ripped. It's that rev c is quite old and should be replaced anyway :happy2:
Those pictures show nothing of interest.
-
well i bought the new DV revision G which is the new one i have replaced ,cleared the error code and did a small ride its true that i can feel power boost but whe i came back home i connect the VCD and found 1 new error as below .
is it related to the new DV i have replaced or it was supposed to be ?
i have already replaced the PCV with the new revision as well couple of months before so it should not be related to pcv
any suggestion ?
1 Fault Found:
001089 - EVAP Emission Control Sys
P0441 - 002 - Incorrect Flow
Freeze Frame:
Fault Status: 01100010
Fault Priority: 2
Fault Frequency: 1
Mileage: 156932 km
Time Indication: 0
Date: 2000.00.00
Time: 19:56:19
Freeze Frame:
RPM: 748 /min
Load: 16.1 %
Speed: 0.0 km/h
Temperature: 82.0°C
Temperature: 42.0°C
Absolute Pres.: 990.0 mbar
Voltage: 13.462 V
Readiness: 0010 0101
-
well i bought the new DV revision G which is the new one i have replaced ,cleared the error code and did a small ride its true that i can feel power boost but whe i came back home i connect the VCD and found 1 new error as below .
is it related to the new DV i have replaced or it was supposed to be ?
i have already replaced the PCV with the new revision as well couple of months before so it should not be related to pcv
any suggestion ?
1 Fault Found:
001089 - EVAP Emission Control Sys
P0441 - 002 - Incorrect Flow
Freeze Frame:
Fault Status: 01100010
Fault Priority: 2
Fault Frequency: 1
Mileage: 156932 km
Time Indication: 0
Date: 2000.00.00
Time: 19:56:19
Freeze Frame:
RPM: 748 /min
Load: 16.1 %
Speed: 0.0 km/h
Temperature: 82.0°C
Temperature: 42.0°C
Absolute Pres.: 990.0 mbar
Voltage: 13.462 V
Readiness: 0010 0101
http://wiki.ross-tech.com/wiki/index.php/16825/P0441/001089