MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Stig_gti on February 07, 2014, 07:16:21 pm
-
Right I've purchased an itg for my golf gti, I've already have a full BCS system and was wondering if I fit the itg well it make any difference to the car without the remap.
Or is it not good to fit it without the map not going to get it mapped untill I have s3 intercooler fitted and hpfp.???
-
If its just a panel filter it will not make any difference when you fit it it wont make any difference to engine performance either way
-
Sorry should of said full intake
-
Anyone
-
If your after stage 2 power just add a S3 cooler to what you've already done and get it mapped and if you want stage 2+ add a hpfp and get it mapped . Stage 2 figures range from 255-265 bhp stage 2+ Range from 265-280 bhp dependant on car, hardware and map
-
If your after stage 2 power just add a S3 cooler and get it mapped and if you want stage 2+ add a hpfp and get it mapped . Stage 2 figures range from 255-265 bhp stage 2+ 265-280 bhp dependant on car, hardware and map
And the rollers your testing it on :grin:
-
Fit it now, then get the other parts and go stage 2+. You can put it on before the map it's no problem. Obv it will chatter and wooosh a lot more when mapped tho and better performance.
-
Ok thanks guys for the help
-
You got the ITG maxogen kit?
-
Yes mate turned up yesterday. Cheers for that
-
Quality bit of kit there, got the same kit on my Edition 30 running stage 2 plenty of chatter! :happy2:
-
If your after stage 2 power just add a S3 cooler and get it mapped and if you want stage 2+ add a hpfp and get it mapped . Stage 2 figures range from 255-265 bhp stage 2+ 265-280 bhp dependant on car, hardware and map
And the rollers your testing it on :grin:
yeah well they all vary , we all know that by now :happy2: