MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: D3hnt on March 07, 2014, 12:05:23 am

Title: Led valeo coding advice
Post by: D3hnt on March 07, 2014, 12:05:23 am
As above, on the outer taillights. how do you code out the centre light. Just leaving you with the outer ring. When on side lights, as it also is the brake light?

I can get the outer ring to turn off but not the centre

Can this be done

I have not done the inner led mod as of yet

Hope you can help
Title: Re:
Post by: Shoy1980 on March 07, 2014, 12:36:24 am
Can't you take the bulb out and clear the bulb error code?
Title: Re:
Post by: SI-R32 on March 07, 2014, 06:58:30 am
Can't remember what bit it is but in the cecm your looking for something like use break light as tail lights, reduce the % to zero,  click do it,  turn lights on,  that's it
Title: Re:
Post by: D3hnt on March 07, 2014, 03:19:59 pm
Can't you take the bulb out and clear the bulb error code?

The outer taillights are full led, you turn it off with vagcom, which im struggling to do
Title: Re:
Post by: D3hnt on March 07, 2014, 03:29:23 pm
Can't remember what bit it is but in the cecm your looking for something like use break light as tail lights, reduce the % to zero,  click do it,  turn lights on,  that's it

If only i knew where to find it, must off spent an hour last night trying different things
Title: Re: Led valeo coding advice
Post by: SI-R32 on March 07, 2014, 03:31:29 pm
this is where you do it mate

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fzz45%2FSI-R32%2Fdoghnut_zps9343e612.jpg&hash=0ed9fca601c4d67ce25d4bc57b7d680bb48b0ca2)
Title: Re: Led valeo coding advice
Post by: D3hnt on March 07, 2014, 04:52:24 pm
this is where you do it mate

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fzz45%2FSI-R32%2Fdoghnut_zps9343e612.jpg&hash=0ed9fca601c4d67ce25d4bc57b7d680bb48b0ca2)

So thats in central convenience (46)?

Shall i copy the photo, as in 0x1=0 value
Title: Re:
Post by: SI-R32 on March 07, 2014, 05:01:16 pm
Just change your value to zero and enter it , then they won't light up
Title: Re:
Post by: SI-R32 on March 07, 2014, 05:12:15 pm
Should have said no its in 09 Electrics, which is lights and stuff,  46 is locking and alarm and stuff
Title: Re:
Post by: D3hnt on March 07, 2014, 06:35:30 pm
Should have said no its in 09 Electrics, which is lights and stuff,  46 is locking and alarm and stuff

Ok, thanks. I'll give it a try tomorrow

Thank you