MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: garrardrj on April 03, 2014, 12:41:44 pm
-
Now i have been thinking about the prospect of not having my ED30 and getting a more practical car and the fitting of a towbar !
I have thought that would it be possible to cut out the recessed bit (the bit that is around the exhaust tails and the towing eye plug) on the ED30 carefully and then plastic weld something to the cut out bit and the rest of the lower valance to allow the piece to be refitted with some king of screw or joiner ?
This would allow a removeable towbar to be mounted with the piece removed and when the towbar is not needed the piece could be put back in place and back the original look ?
If you look closely aroud the edge of the piece that would be cut out , it looks like a separate bit anyway
Your views on the feasability
-
Sounds like a world of pain and not a good way for an eddy to go ;)
What are you mainly towing?
-
Buy a spare copy rear lower bumper part and cut that for the tow bar then you could refit the original one if or when u decide to sell or change
-
Yep doesn't sound good to me lol
-
That sounds like an awful idea to me.
Maybe pick up a standard GTI plastic valance and bolt that on until a time that you no longer need it or you want to sell the car.
Only reason being is most people who want to buy an Eddy will probably be, like most of the people on here, meticulous when it comes to keeping it in good condition, having a hole drilled in the back wont help.
-
That sounds like an awful idea to me.
Maybe pick up a standard GTI plastic valance and bolt that on until a time that you no longer need it or you want to sell the car.
Only reason being is most people who want to buy an Eddy will probably be, like most of the people on here, meticulous when it comes to keeping it in good condition, having a hole drilled in the back wont help.
X2.
Buy a cheap normal GTI bumper and butcher that :signLOL:
Then you have the ED30 valance ready to bolt back on afterwards when you stop towing or sell up :happy2:
-
Buy a spare copy rear lower bumper part and cut that for the tow bar then you could refit the original one if or when u decide to sell or change
That's all I did with me old FR. Just cut thru the valance, if I wanted to take the towbar off all I had to do was buy a new valance for like 30 quid or whatever
-
My Pirelli came with a detachable tow bar and a standard GTI lower valance with the removable cover for the tow bar, looks ok when not in use and it does come in handy if you need a tow bar.
I like the idea of having the use of a tow bar for my bikes to ferry about but my bikes are worth alot of money so would still be happier having them inside (wheels removed).
I was hoping the owner still had the standard Pirelli valance but he has misplaced it :stupid:
I am tempted to go R32 rear end but seems to be a expensive mod so was looking to return the rear to standard, so if you have a black magic rear valance on your Ed30 I will swap the whole lot with you tow bar and all?
-
And I'm in Norfolk :signLOL: