MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: bluo on August 12, 2014, 09:50:01 am
-
Worth getting one or not? Anyone got any experience with them?
http://www.hpamotorsports.com/product_20tim.html
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F14%2F08%2F12%2Fe4e8e2eb.jpg&hash=4f24e3558da2f435eed2336347115798e59772ad)
-
Not really unless running big power the standard one is fine with over 500hp
Useful for 4 port wmi tho and looks good
-
Very Nice looking !
HPA's Performance intake when combined with our STG2SR V1.01 calibration for FSI expands the powerband from 4600 through redline. Gains between 15 to 25 HP are seen through the upper RPM generating a new fresh pull out of your 2.0T!
Expand your 2.0T's Horizons
2.0T Intake Manifold
Featuring a 40% larger Plenum over OE
HPA's intake outflows the OE Fsi intake by 24%
HPA's intake outflows the OE Tsi intake by 12%
Even distribution across all runners
(tests run @28"H20/oe 57mm TB, WOT)
Integrated flapper delete
Direct bolt-on replacement for your OEM plastic
Integrated Water Meth port
Cast aluminum construction
Durable oem powder coat finish
:party: :driver: :party:
-
Not really unless running big power the standard one is fine with over 500hp
Useful for 4 port wmi tho and looks good
So what you're saying is save the cash while I'm K04 and only spend it when I fit WMI?
Or I could get it, drill, tap and plug the 4 ports for WMI for a later date...
Love your build thread by the way!
-
i have heard they should have issues with the cast so they aren't airtight, but i haven't been able to get it confirmed.
-
i have heard they should have issues with the cast so they aren't airtight, but i haven't been able to get it confirmed.
Where did you hear that?
-
i have heard they should have issues with the cast so they aren't airtight, but i haven't been able to get it confirmed.
Where did you hear that?
Unconfirmed source, but as stated not verified. I myself are looking into these so i'm not biazed against the product.
Statllers might have more info as they sell and fit them :happy2:
-
i have heard they should have issues with the cast so they aren't airtight, but i haven't been able to get it confirmed.
Where did you hear that?
Unconfirmed source, but as stated not verified. I myself are looking into these so i'm not biazed against the product.
Statllers might have more info as they sell and fit them :happy2:
yeah I called them, they must have been quite busy cause they were a little short on the phone so I thought I'd call another day.
-
The HPA manifold really needs a custom map to get the best out of it. Essential piece of kit if you are thinking about running 2bar plus on a BT conversion.
-
The HPA manifold really needs a custom map to get the best out of it. Essential piece of kit if you are thinking about running 2bar plus on a BT conversion.
I gathered as much from research a custom map would be needed. I'm still learning as I go along, can you explain the pressure thing, what will the currently be running with a K04?
-
id wait for IE number if you was going to get one! they made 80bhp out of the 1.8t manifold running a big turbo inbetween the 300/400 some serious development has gone into this manifold!
for some reason i cant find a link to it atm :/
-
id wait for IE number if you was going to get one! they made 80bhp out of the 1.8t manifold running a big turbo inbetween the 300/400 some serious development has gone into this manifold!
for some reason i cant find a link to it atm :/
If you do please post it up...