Will changing timing belt reset my remap

[Jgavin1]

My edition 30 has a stage 1 remap on it and my timing belt/water pumps is due replacement soon. I’ve read that the battery needs disconnected to change the belt so could this reset the ecu?

Thanks

[neilw]

No, should be fine.

You could do the belts without disconnecting the battery. Just be really careful not to accidentally try and start it! Its good practice to disconnect it.

[pudding]

It's only the Revo map that defaults to a reduced performance mode if the battery is pulled.  You need an SPS switch to re-enable the Stage 1 map, or a trip to a Revo dealer.

If you don't have a Revo map, pulling the battery won't affect anything.

As above, the battery doesn't need disconnecting to change the belt, but a lot of garages do it regardless as a precautionary measure.