Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Heater blowing hot OR cold, nothing in between.  (Read 1028 times)

Offline ksamyui

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 0
  • Posts: 53
    • Email
Heater blowing hot OR cold, nothing in between.
« on: April 30, 2023, 04:56:57 pm »
Got a bit of a weird one going on.
I’m getting nice cold air on ‘Lo’ setting, but 16° all the way up to Max is just the same hot air. Any ideas? Last time I checked on VCDS there were no errors.
Logged

Offline Smithy1222

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 2
    • Email
Re: Heater blowing hot OR cold, nothing in between.
« Reply #1 on: May 30, 2023, 01:41:59 pm »
I wonder if you have a dodgy interior temperature sensor? if its reading too cold all the time it might be trying to heat the cabin up to 16 or above.
Can you measure the temperature it is reading in vcds?
Logged

Offline ksamyui

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 0
  • Posts: 53
    • Email
Re: Heater blowing hot OR cold, nothing in between.
« Reply #2 on: June 04, 2023, 07:38:35 pm »
Quote from: Smithy1222 on May 30, 2023, 01:41:59 pm
I wonder if you have a dodgy interior temperature sensor? if its reading too cold all the time it might be trying to heat the cabin up to 16 or above.
Can you measure the temperature it is reading in vcds?

Yeah I’ll plug VCDS in when I get a chance. I recon it’s either that or the flaps are stuck open behind the glovebox
Logged
Pages: [1]   Go Up
« previous next »