Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Cam follower T.D.C  (Read 1055 times)

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Cam follower T.D.C
« on: March 20, 2012, 11:06:42 am »
Hi again

further to changing cam follower ,do i have to set T.D.C before changing it..??

Thanks
Logged

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=bah3j15v18fosupf62bc19f21g&/topic,19740.0.html
Re: Cam follower T.D.C
« Reply #1 on: March 20, 2012, 11:09:38 am »
Mine was done without setting TDC.
Logged

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: Cam follower T.D.C
« Reply #2 on: March 20, 2012, 11:11:37 am »
It is recommended as part of the process but it isn't necessary. It is there so that the cam lobe (which is egg shaped) is at it's thinnest point. This then removes any tension on the pump piston & spring.

It's mainly so you don't damage/bend the piston when putting it back together.

When i changed my pumps from APR back to OEM i never bothered with setting TDC :happy2:
Logged

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Re: Cam follower T.D.C
« Reply #3 on: March 20, 2012, 11:15:39 am »
Cheers Buds  :wink:
Logged

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: Cam follower T.D.C
« Reply #4 on: March 20, 2012, 12:05:55 pm »
The best way of refitting the pump is to place the pump in the recess and loosly fit the screws.  Then just gently tighten each screw in turn and it will go in without any bending or damage.
Logged
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box

Offline robdf2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 195
    • Email
Re: Cam follower T.D.C
« Reply #5 on: March 20, 2012, 10:17:38 pm »
i also think if you set at tdc there is minimal compression needed on the spring when re-inserting the follower and doing back up the bolts on the fuel pump.
Logged
2008 Chrono yellow Cupra

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Cam follower T.D.C
« Reply #6 on: March 20, 2012, 10:45:57 pm »
Just be careful when tightening the bolts and don't exceed the spec torque setting.   :smiley:
Logged
Without traction power is nothing!
Pages: [1]   Go Up
« previous next »