Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Help with Geometry settings ??????  (Read 2312 times)

Offline gazon69

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 20
  • -Receive: 34
  • Posts: 1017
Help with Geometry settings ??????
« on: March 26, 2012, 05:08:46 pm »
Hi guys, i am fitting my walk and bilstein b12 kit with h&r springs at the weekend. The car should be lowered around 30mm. Can anyone tell me what my geometry settings should be for normal road use as i will be taking it for a full set up once all is fitted. Cheers guys.
« Last Edit: March 26, 2012, 05:22:24 pm by gazon69 »
Logged

Offline gazon69

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 20
  • -Receive: 34
  • Posts: 1017
Re: Help with Geometry settings ??????
« Reply #1 on: March 29, 2012, 08:26:34 am »
Anyone??????
Logged

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=24f6231ustqbgetht4nkr50hk3&/topic,19740.0.html
Re: Help with Geometry settings ??????
« Reply #2 on: March 29, 2012, 08:35:58 am »
If you take it to somewhere that knows what they are doing, they will know the settings that you require. If they don't, the chances are they don't know what they are doing.
Logged

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Help with Geometry settings ??????
« Reply #3 on: March 29, 2012, 08:32:51 pm »
 :signLOL: good point Rich!!!
Just make sure you take it to a 4 wheel geometry specialist, anything else won't be good enough!!
Logged
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline heavyd

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 29
  • Posts: 1372
    • Email
Re: Help with Geometry settings ??????
« Reply #4 on: March 30, 2012, 01:19:20 am »
http://www.alignmycar.co.uk/CentreLocator

has all the 4 wheel aligment centres on it :happy2:
Logged

Offline ROH ECHT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 113
  • -Receive: 149
  • Posts: 2116
  • K04 PLAY....ZOOM DIS!
Re: Help with Geometry settings ??????
« Reply #5 on: March 30, 2012, 07:50:59 am »
I always set the front as close to but not over 1deg toed in, 0.5deg toed in is perfect for less HP cars. And the rear is always between -1.0 to -1.5 camber.
Logged
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

Offline gazon69

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 20
  • -Receive: 34
  • Posts: 1017
Re: Help with Geometry settings ??????
« Reply #6 on: March 30, 2012, 07:06:46 pm »
Right, here's where it stands. I have been to a 4 wheel alignment center local to me, he has the state of the art machine. I have spoken to the operator and he is telling me that he will only be able to align  my car to the standard settings at normal ride height, but as i am fitting h&r springs then i am assuming that those settings will be useless. Hope you understand this coz i dont,    :confused:
Logged

Offline welikeaps

  • Always Involved
  • ****
  • Thank You
  • -Given: 22
  • -Receive: 15
  • Posts: 232
Re: Help with Geometry settings ??????
« Reply #7 on: April 02, 2012, 09:53:38 pm »
Quote from: gazon69 on March 30, 2012, 07:06:46 pm
Right, here's where it stands. I have been to a 4 wheel alignment center local to me, he has the state of the art machine. I have spoken to the operator and he is telling me that he will only be able to align  my car to the standard settings at normal ride height, but as i am fitting h&r springs then i am assuming that those settings will be useless. Hope you understand this coz i dont,    :confused:

was told the same thing based on the above information today. I was also told that they can't adjust the front castor either, which seems off so i left and am going to ask elsewhere.
« Last Edit: April 03, 2012, 12:53:40 pm by welikeaps »
Logged

Offline gazon69

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 20
  • -Receive: 34
  • Posts: 1017
Re: Help with Geometry settings ??????
« Reply #8 on: April 03, 2012, 09:59:17 am »
Quote from: ROH ECHT on March 30, 2012, 07:50:59 am
I always set the front as close to but not over 1deg toed in, 0.5deg toed in is perfect for less HP cars. And the rear is always between -1.0 to -1.5 camber.
Car is around the 300 mark so what to you suggest
Logged

Offline the bruce

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 322
  • -Receive: 100
  • Posts: 1591
    • my GTI
Re: Help with Geometry settings ??????
« Reply #9 on: April 03, 2012, 12:09:54 pm »
Road only: alignment to Volkswagen specs

And try a search if you feel a need to learn more. Your're not the first.
Logged
"You get what you pay for."

Offline SteveyD

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 7
  • Posts: 218
    • Email
Re: Help with Geometry settings ??????
« Reply #10 on: April 03, 2012, 11:20:57 pm »
Depending on your location try somewhere like http://www.ninemeister.com/ I know a guy who does all the body shop stuff for them.  The owner is very clued up including Motorsport prep & F1.
Logged
Pages: [1]   Go Up
« previous next »