Make a donation

Author Topic: How to test a diverter D to know if its faulty?  (Read 2708 times)

Offline Sammy

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 7
  • Posts: 471
    • Email
How to test a diverter D to know if its faulty?
« on: April 14, 2012, 04:49:50 pm »
Recently i have been feeling reduced performance and MPG and i cant be sure but sometimes i get a hesitation when on boost so maybe diverter, How would i know if it is leaking boost or not?
GTI MK5 with all the gooodies

K04 power going on soon!

Offline Thor

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 27
  • -Receive: 25
  • Posts: 713
Re: How to test a diverter D to know if its faulty?
« Reply #1 on: April 14, 2012, 06:20:21 pm »
You really need some one to scan with VCDS / do some logs. 

It may be that you have a coil pack on the way out.
Gone but not forgotten - Edition 30 No.2239
                                     Mk6 GTI

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: How to test a diverter D to know if its faulty?
« Reply #2 on: April 14, 2012, 06:27:38 pm »
Or smoke test it? All good tuners have the ability to run smoke though your boost system  :happy2:
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline Geoffcarragh

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 83
    • Email
Re: How to test a diverter D to know if its faulty?
« Reply #3 on: April 15, 2012, 12:59:08 am »
when the rubber DV's fail you can hear a whistling noise (like air escaping from a balloon) when the turbo kicks in.

Easiest to hear the noise under hard acceleration in 2nd and 3rd gear.

Or you could take it out and have a look. this means getting under the car for the early K03 engines, but its at the top on K04 cars.
'05 Silver, 5 door, 18'' Monza II, Leather, Lux Pack, Gear Stick, CD changer in armrest, colour coded rear bumper, upgraded DV,

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: How to test a diverter D to know if its faulty?
« Reply #4 on: April 15, 2012, 01:17:59 am »
when the rubber DV's fail you can hear a whistling noise (like air escaping from a balloon) when the turbo kicks in.

Easiest to hear the noise under hard acceleration in 2nd and 3rd gear.

Or you could take it out and have a look. this means getting under the car for the early K03 engines, but its at the top on K04 cars.

Hard to tell on the Revision D DV as there's no rubber to burst and the leaks are more subtle (air escaping down the side of a piston).
VCDS logs are probably the best way to do it without taking it off and smoke testing it.
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline Sammy

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 7
  • Posts: 471
    • Email
Re: How to test a diverter D to know if its faulty?
« Reply #5 on: April 15, 2012, 01:42:53 pm »
What is the method of using VCDS to test a diverter valve, I know someone that has it but he's a total amateur
GTI MK5 with all the gooodies

K04 power going on soon!

Offline ktlstar

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 10
  • Posts: 434
    • Email
Re: How to test a diverter D to know if its faulty?
« Reply #6 on: April 15, 2012, 02:07:45 pm »
you measure boost pressure vs specified pressure will give you a hint, however if showing low could be many other reasons i.e boost hose leak.  :happy2:
- #1240 ED30 Revo STAGE2+
- Southeast - Vag Com owner