Author Topic: Bolt size for Audi split rims (Read 1862 times)

Matto · « **on:** June 08, 2012, 07:00:59 pm »

Does anyone know what the bolt/thread size is for the Audi split rims as in the picture please?

Thanks in advance

sub39h · « **Reply #1 on:** June 08, 2012, 07:17:36 pm »

You should be able to use your factory bolts

rdfcpete · « **Reply #2 on:** June 08, 2012, 07:31:12 pm »

You should be able to use your factory bolts

+1
I used OEM wheel bolts with my Audi Splits IIRC (from my Monzas)

DaveB@Vagbremtechnic · « **Reply #3 on:** June 08, 2012, 07:32:25 pm »

Wheel assembly bolts you mean?

mvb12 · « **Reply #4 on:** June 08, 2012, 07:35:36 pm »

does anyone know if you would need spacers for these alloys if running the NQSBBK

Matto · « **Reply #5 on:** June 08, 2012, 08:49:58 pm »

I'm not looking to buy a new set I just need to know the size so i can source a tap of the same thread.

sub39h · « **Reply #6 on:** June 11, 2012, 03:20:11 pm »

does anyone know if you would need spacers for these alloys if running the NQSBBK

if you're using A3 ones then most likely

any other and you'll be fine without them

mvb12 · « **Reply #7 on:** July 07, 2012, 08:20:33 pm »

Slapped on my A6 BBS Splits and theres mega space to play with

roll on NQSBBK