Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RCD300 & RNS510 swap  (Read 1402 times)

Offline mad_pete

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 347
RCD300 & RNS510 swap
« on: June 30, 2012, 09:24:07 am »
I'm looking to swap a RNS510 and RCD300 between 2 08 plate cars.
Do I need the adaptor for the aerial and a new gps aerial?
Or is it possible to get the factory fit gps aerial out? Do I need an adaptor to allow the rcd 300 to go where the rns510 was ?
Logged

Offline mad_pete

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 347
Re: RCD300 & RNS510 swap
« Reply #1 on: July 03, 2012, 04:31:25 pm »
The gps aerial and convert to the 510 seems straightforward putting the rcd300 where the 510 was seems like it might need an adaptor made. Are they standard connecters ? Maybe I can get some and make a cable.
Logged

Offline DaveR77

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 187
    • UK-MKIVS.net
Re: RCD300 & RNS510 swap
« Reply #2 on: July 03, 2012, 06:51:29 pm »
You'll need an aerial adapter for the car with the RCD, unless the other car has one

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180915455858#ht_500wt_1413

Quote from: mad_pete on June 30, 2012, 09:24:07 am
Do I need an adaptor to allow the rcd 300 to go where the rns510 was ?

No
« Last Edit: July 03, 2012, 06:55:47 pm by DaveR77 »
Logged

Offline mad_pete

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 347
Re: RCD300 & RNS510 swap
« Reply #3 on: July 03, 2012, 07:13:53 pm »
Thanks but I also need the opposite of that to fit a Rcd300 into a rns510 connector.
Logged
Pages: [1]   Go Up
« previous next »