Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Miltek downpipe fitment problem!!  (Read 3904 times)

Offline Toast

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 3
  • Posts: 779
  • Oot n By all the Keyboard Warriors
Miltek downpipe fitment problem!!
« on: August 27, 2009, 07:54:24 pm »
Hi Guys looking for some much needed help as I have a problem, As some of you may know I recently purchased Jonny c's Miltek downpipe and sportscat for my Ed30 It arrived fine but tonight I was in my garage have a look at how to fit it to my car and came across a problem the down pipe looks as if it will fit fine but the connecting pipe that slides onto the cat has a flanged end where it joins to my existing non-res miltek pipe Which has a sleaved end on it  :confused: :scared: Now I have the resonated box aswell which is off the car and in my garage so i tried mating them up but it won't go as it also has a sleaved end as opposed to the flange end of the new cat pipe?!

Any ideas guys?  :confused: As I've pm'd Jonny just now aswell for some info

here's some pics

flange end of new catback pipe


flange pipe with sleaved end the joins to dwnpipe which is Ok


flange end of cat pipe which should join to my existing resonated miltek box but doesn't


Another view of different ends of the pipes


Logged
Editon 30, no-0472-, 1/4mile 13.6sec@Crail-Giac 348bhp,345lbsft,Milltek tbe,s3 Cooler,Helix single mass clutch kit,Eibach Coilovers,Bsh Cold Air Intake , Autotech HPFP,s3 brakes,Speedline Turini's,Xenons

Offline jonnyc

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 15
  • Posts: 2180
  • Herrooooo!
    • Email
Re: Miltek downpipe fitment problem!!
« Reply #1 on: August 27, 2009, 07:55:42 pm »
Quote from: Toast on August 27, 2009, 07:54:24 pm
Hi Guys looking for some much needed help as I have a problem, As some of you may know I recently purchased Jonny c's Miltek downpipe and sportscat for my Ed30 It arrived fine but tonight I was in my garage have a look at how to fit it to my car and came across a problem the down pipe looks as if it will fit fine but the connecting pipe that slides onto the cat has a flanged end where it joins to my existing non-res miltek pipe Which has a sleaved end on it  :confused: :scared: Now I have the resonated box aswell which is off the car and in my garage so i tried mating them up but it won't go as it also has a sleaved end as opposed to the flange end of the new cat pipe?!

Any ideas guys?  :confused: As I've pm'd Jonny just now aswell for some info

here's some pics

flange end of new catback pipe


flange pipe with sleaved end the joins to dwnpipe which is Ok


flange end of cat pipe which should join to my existing resonated miltek box but doesn't


Another view of different ends of the pipes




I have replied to your PM..
Logged
APR Stage III TT-RS - 11.37 1/4 mile - 2.82 0-60 MPH

Build thread http://www.vagoc.co.uk/vb/showthread.php?t=3128

Offline Oli

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 19
  • -Receive: 10
  • Posts: 835
  • living the dream....
    • Email
Re: Miltek downpipe fitment problem!!
« Reply #2 on: August 27, 2009, 08:05:08 pm »
I think you need a connecting sleeve, and I think I might have what you need.  I will need to check at work, and it can be yours for the postage costs if I can find it
Logged
www.bmvs-camperhire.co.uk - Brand new VW California SE rental

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: Miltek downpipe fitment problem!!
« Reply #3 on: August 27, 2009, 10:23:58 pm »
Is that a 3" downpipe?
Logged

Offline Toast

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 3
  • Posts: 779
  • Oot n By all the Keyboard Warriors
Re: Miltek downpipe fitment problem!!
« Reply #4 on: August 27, 2009, 10:26:56 pm »
Yeah its a 3'' downpipe Hedge :happy2:
Logged
Editon 30, no-0472-, 1/4mile 13.6sec@Crail-Giac 348bhp,345lbsft,Milltek tbe,s3 Cooler,Helix single mass clutch kit,Eibach Coilovers,Bsh Cold Air Intake , Autotech HPFP,s3 brakes,Speedline Turini's,Xenons

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: Miltek downpipe fitment problem!!
« Reply #5 on: August 27, 2009, 11:13:45 pm »
Quote from: Toast on August 27, 2009, 10:26:56 pm
Yeah its a 3'' downpipe Hedge :happy2:

I thought Ed30 system was 2.75" or 65mm.  :sad1:

I'm sure a reducer will work.  :happy2:
Logged

Offline Deako

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 38
  • -Receive: 44
  • Posts: 1655
  • Eat, Sleep....VAG
Re: Miltek downpipe fitment problem!!
« Reply #6 on: August 28, 2009, 11:58:57 am »
Birdseed wouldnt be my choice of snack when working on the car.

Good luck getting it sorted!!  :happy2:
Logged
#1493

Offline CarrG

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 17
  • Posts: 589
Re: Miltek downpipe fitment problem!!
« Reply #7 on: August 28, 2009, 01:23:23 pm »
I think the connecting pipe is wrong. Only 30 notes for a new one. Should be like this on mine:




Hope you get it sorted. Could just cut and sleeve.
Logged
K1 Revo 2+
Ibis RS3
VW California 180 DSG "Candy"!

Offline NotNormal

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 6
  • Posts: 317
    • Email
Re: Miltek downpipe fitment problem!!
« Reply #8 on: August 28, 2009, 03:43:15 pm »
Quote from: Hedge on August 27, 2009, 11:13:45 pm
Quote from: Toast on August 27, 2009, 10:26:56 pm
Yeah its a 3'' downpipe Hedge :happy2:

I thought Ed30 system was 2.75" or 65mm.  :sad1:

I'm sure a reducer will work.  :happy2:

Yeah, the systems are 2.75"
The down pipes are 3"
It should come with a reducer to fit it to the miltek system.

On my soot chucker, the DPF removal pipe is 2.5" and the system (same as ED30/GTi) is 2.75" - my reducer was missing :( .....

.....so i made one, contacted Miltek, the helpfull chap Pete sent me one out FOC the next day

If you need one, contact Miltek, they are only acouple of quid to buy

Logged
Don't judge me by your ability !
__________________________________

Current daily crapper - Audi A6 Avant 3.0tdi SLine Quattro

Previous favourite rides :

BMW E92 335d M/Sport (351/520)
BMW  E92 335d SE (339/500)
Golf MK5 GT170 Diesel Sport (220/330)
Audi S4 (B6) - Noggy blue (366bhp)
Evo VI (6 ;) ) RSII - Scotia White (420bhp)
Astravan Sportive 1.9 CDTi - 190bhp
Astra GTE (MK2) Turbo (

Offline Toast

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 3
  • Posts: 779
  • Oot n By all the Keyboard Warriors
Re: Miltek downpipe fitment problem!!
« Reply #9 on: August 28, 2009, 03:53:44 pm »
Haha like your Idea of thinking Deako  :laugh:

Phoned Milltek this morning Spoke to a chap called Leigh couldn't get Charlie who I usually deal with never the less he was a very helpful chap didn't have any connecting pipes in stock but managed to source me 1 through Awesome so everythings sorted  :happy2:  Thanks for the info guys Hope to get it fitted next Sat along with Hpfp and Anti lift kit  :party:
Logged
Editon 30, no-0472-, 1/4mile 13.6sec@Crail-Giac 348bhp,345lbsft,Milltek tbe,s3 Cooler,Helix single mass clutch kit,Eibach Coilovers,Bsh Cold Air Intake , Autotech HPFP,s3 brakes,Speedline Turini's,Xenons

Offline SteveP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 117
  • -Receive: 340
  • Posts: 6005
    • My Project
Re: Miltek downpipe fitment problem!!
« Reply #10 on: August 28, 2009, 05:20:54 pm »
^^^ The reason you couldn't get Charlie was he was out testing my car all this morning at the factory :laugh: :laugh:
Logged

Offline Toast

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 3
  • Posts: 779
  • Oot n By all the Keyboard Warriors
Re: Miltek downpipe fitment problem!!
« Reply #11 on: August 28, 2009, 05:24:14 pm »
Oh aye do tell more^^^^^ All I got told was he was over at the factory :party:
Logged
Editon 30, no-0472-, 1/4mile 13.6sec@Crail-Giac 348bhp,345lbsft,Milltek tbe,s3 Cooler,Helix single mass clutch kit,Eibach Coilovers,Bsh Cold Air Intake , Autotech HPFP,s3 brakes,Speedline Turini's,Xenons

Offline SteveP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 117
  • -Receive: 340
  • Posts: 6005
    • My Project
Re: Miltek downpipe fitment problem!!
« Reply #12 on: August 28, 2009, 05:29:45 pm »
I was there doing some development testing for a different size back box and resonator section, as the res version I had was far too quiet and the non-res far too droonie/boomie at mway speeds.

I now have a nice sounding "part res" system  :smiley:

These will evenutally become options for the Mk5 on the Milltek price list  :pomppomp:
Logged

Offline Toast

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 3
  • Posts: 779
  • Oot n By all the Keyboard Warriors
Re: Miltek downpipe fitment problem!!
« Reply #13 on: August 28, 2009, 05:36:58 pm »
Jammy Toad :P  Think I'm going to put my resonator box back on when the downpipe gets fitted as the non-res pipe like you say is quite boomi at motorway speed with the map switched on  :driver:
Logged
Editon 30, no-0472-, 1/4mile 13.6sec@Crail-Giac 348bhp,345lbsft,Milltek tbe,s3 Cooler,Helix single mass clutch kit,Eibach Coilovers,Bsh Cold Air Intake , Autotech HPFP,s3 brakes,Speedline Turini's,Xenons
Pages: [1]   Go Up
« previous next »