Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: MFSW installation  (Read 1030 times)

Offline n17chm

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 18
    • Email
MFSW installation
« on: June 12, 2013, 10:42:38 pm »
Is there any coding required to fit MFSW buttons to a stardard cd player?

No sat nav or media (iPod in centre consol)
08 Golf GTi DSG
Logged

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: MFSW installation
« Reply #1 on: June 12, 2013, 10:51:43 pm »
Yes, you'll need to tell your SWCM (steering wheel control module) that buttons are there via coding. You may or may not already have a high end module, you'd have to check the part number.
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: MFSW installation
« Reply #2 on: June 12, 2013, 11:17:30 pm »
if you have dsg with paddles it will be a straight swop without coding
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline n17chm

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 18
    • Email
Re: MFSW installation
« Reply #3 on: June 13, 2013, 07:50:05 am »
Yes I have DSG with paddles, so I can just fit them and it requires no coding?
Logged

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: MFSW installation
« Reply #4 on: June 13, 2013, 07:58:16 am »
In that case I stand corrected!
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline Dave J

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 45
  • -Receive: 63
  • Posts: 880
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,55935.0.html
Re: MFSW installation
« Reply #5 on: June 13, 2013, 10:36:23 pm »
Can vouch for this - Kalu fitted MFSW buttons to my '08 ED30 with DSG - no coding was required, but he did scan for faults after  :happy2:.

As my car only has the midline display, the VCDS shows an error as I still have the original wiper stalk, which has the MFD menu rocker switch on the end of it. The car sort of gets confused (I think) as it has a feed for scrolling the MFD display also via the MFSW controls.

If I ever find a set of highline 974A GTI dials, then I hope to have the stalk changed at the same time to eliminate the error.

Still, love the MFSW buttons - always found the reach to the volume knob on the mkv a bit further than it was in my mkiv, so a very worthwhile 'mod'!
Logged


Edition 30 - no. 1387
Pages: [1]   Go Up
« previous next »