Make a donation

Author Topic: Scratches on exterior lights  (Read 1075 times)

Offline lukejenks101

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 125
    • Email
Scratches on exterior lights
« on: December 14, 2011, 08:55:44 pm »
I have a few scratches on my headlights and swirls on my rear lights,  can anyone reccomend a way of removing these? I have a megs g220 coming for xmas or would that be too harsh?
« Last Edit: December 15, 2011, 08:37:36 am by lukejenks101 »

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7834
  • ED30 No.1412
    • Email
Re: Scratches on exterior lights
« Reply #1 on: December 15, 2011, 03:39:01 pm »
Should be fine. Lights are plastic so don't use anything too abrasive.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline swgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 6
  • Posts: 440
  • GTI owners are born not manufactured!
Re: Scratches on exterior lights
« Reply #2 on: December 22, 2011, 07:41:33 pm »
My fronts are totally goosed but quite a few on here have recommended autosol metal polish, I can confirm it works wonders!
Laser Blue 3dr No 209683, Leather, Monza II's and a few other goodies...........GONE but not forgotten......now in an A4 S-Line Avant 170tdi......god I miss the Gti.

Offline keano

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 79
  • -Receive: 35
  • Posts: 1588
    • Email
Re: Scratches on exterior lights
« Reply #3 on: December 22, 2011, 08:41:12 pm »
Wet and dry sandpaper will be your best bet.

Then machine polish it back, whether it be by your G220 or a rotary polisher.  :happy2:

Offline Squeeguk

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 20
  • -Receive: 28
  • Posts: 625
    • Avante Auto - Still under construction
    • Email
Re: Scratches on exterior lights
« Reply #4 on: December 22, 2011, 09:28:09 pm »
Had some nasty deep scratches on the passenger side headlight of my M3, wet sanded it down starting with 320, then working my way down to 3000. Finished with a good polish and my DA polisher. When I was done, looked like there had never been any scratches there at all. Worked a treat. Just a word of warning, if you do wet sand, do not press too hard, let the paper do the sanding.

Avante Auto - For all your Auto Electronics and Car Audio needs including retrofits down South
PM me or call 0845 116 8870 for advice or pricing. Special Discount for Forum members