Author Topic: Slow But Steady! (Read 3857 times)

Marleymk5 · « **Reply #15 on:** March 10, 2013, 10:43:38 pm »

How did you get your rear badge off to wrap it mate??

nathangallo · « **Reply #16 on:** March 11, 2013, 07:27:08 am »

Tilt the handle as if you was going to open it and you can see we're it splits into two, put a thin screwdriver in there and prise the parts aparts. You can only do this on the later 3d badges.

Marleymk5 · « **Reply #17 on:** March 11, 2013, 07:47:50 am »

Ok mate cheers looks great

nathangallo · « **Reply #18 on:** March 13, 2013, 08:58:21 pm »

What do you guys thinking on getting the front grille wrapped matt black ?

chrisr763 · « **Reply #19 on:** March 13, 2013, 10:41:41 pm »

Quote from: nathangallo on March 13, 2013, 08:58:21 pm

What do you guys thinking on getting the front grille wrapped matt black ?

Prefer gloss

nathangallo · « **Reply #20 on:** April 21, 2013, 01:40:51 pm »

Had a long three days on the car getting things sorted.

Middle of the week i realised my rear pads needed changing so saturday dropped it off had them done along with its 10k service brought it home and gave it a good clean.

Painwork was ok as i detailed it properly before the winter, so was just a normal wash but did top up the Collinite 476s with an extra coat.

Leather cleaned and sealed and full clean inside.

I then removed all the wheels as i havnt sealed the insides since they had been refurbed only the front i have done.

So they had a wash, De-tar, clay bar, Polish with SRP, two coats of Poor Boys Wheel Sealant then a couple of coats of AG Instant Tyre Dressing.

Whilst the wheels were off i painted my calipers as they were looking a little sorry for them selves.

And whilst the wheels were off i thought id show them off a little more.

What do you think.

Here is how it started