Magnetic Torq screwdrivers / bits?

[MrDo]

Can anyone recommend strong magnetic torq screwdrivers or bits that are capable of holding the VW screws/bolts on to them so the don't drop into hard to reach places?

I could have really done with these when removing trim such as C pillar and trim around the boot. Thank god for a magnetic pick up tool but be good to have to rely in using this.

[alfboden]

I would like some as well!

[bacillus]

Why not magnetize your present bits  by stroking them with a strong magnet??

[gjseb16]

i can recommend wera bits i got from work they are very good hand them about a year and still strong as ever

[MrDo]

i can recommend wera bits i got from work they are very good hand them about a year and still strong as ever

Thanks

Why not magnetize your present bits  by stroking them with a strong magnet??

Is it really that simple?? Live and learn :)

[monte]

i can recommend wera bits i got from work they are very good hand them about a year and still strong as ever

Me too, I've got a set of the Wera Impaktor diamond coated bits. They are about £3 max each but they are super strong as they are designed for use in impact drivers.
Plus you only really need T20, T25 and T30.

[DFish]

Left mine stuck to a couple of strong magnets, and still going strong. Depends on the size/weight of the screw you're trying to hold I guess.

Fish

[Kalpsn2000]

i can recommend wera bits i got from work they are very good hand them about a year and still strong as ever

Me too, I've got a set of the Wera Impaktor diamond coated bits. They are about £3 max each but they are super strong as they are designed for use in impact drivers.
Plus you only really need T20, T25 and T30.

Would also be interested in these. You got any links Monte?

[monte]

i can recommend wera bits i got from work they are very good hand them about a year and still strong as ever

Me too, I've got a set of the Wera Impaktor diamond coated bits. They are about £3 max each but they are super strong as they are designed for use in impact drivers.
Plus you only really need T20, T25 and T30.

Would also be interested in these. You got any links Monte?

Here you go. (About 1/2 way down page) 

http://m.screwfix.com/c/tools/wera-impaktor-tritorsion-bits/cat3640005

[simonp]

Just get one of these...

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=29588