Fitting LED puddle lights HELP

[Kam88]

Decided to replace my dull puddle lights with led ordered the LED UNITS from eBay but can't understand how it fits anyone done it ???

If so can you let me know how please ?

[doylebros]

Have you seen this http://www.my-gti.com/2084/adding-door-puddle-lights-to-the-volkswagen-golf-and-jetta

[Kam88]

Have you seen this http://www.my-gti.com/2084/adding-door-puddle-lights-to-the-volkswagen-golf-and-jetta

Already got puddle factory fitted just need to change them but i guess gives me an idea

[Shoduchi]

Turn the mirror to the front (opposite to the normal folding), so it exposes the only screw that holds the puddle light in its place. Remove the factory puddle light and fit the full LED unit. It's easy enough.

PS: You'll need a small torx tool.

[Kam88]

Turn the mirror to the front (opposite to the normal folding), so it exposes the only screw that holds the puddle light in its place. Remove the factory puddle light and fit the full LED unit. It's easy enough.

PS: You'll need a small torx tool.

Thanks managed to figure it out about 2 minute job 

[Mannystk]

You got any before and after pics?

Also what is the bulb type required? Wondering weather to do this but only if the LEDS are bright enough

[The Red Warrior]

I replaced the standard bulb with an LED one. It uses the same wedge type as the interior rear lights. They produced more light but started to flicker if the door was open for a while. Replaced with the eBay ones that replace the whole puddle light as it sounds like the OP has done done and they are much brighter again. Plus, no flickering.