Mk5 Golf with power folding mirrors with key remote

[Shoduchi]

My friend n4s has explained to olsen-72 [Edit], how to enable power folding mirror with the key remote. Now you can have someone in the UK to code your door controllers as my friend did to both my Golfs.

Edit

Edit

Note: This only works with 3rd generation door controllers.

Edit: Removed following olsen-72's request.

[olsen-72]

Thats the ori video mate

[Nasir]

So how do you do it mate? The last I read you needed to change the door controllers for Leon ones. But it would be great if I can tweak it in VCDS.

How do you know if you have 3rd generation door controllers?

[olsen-72]

That cannot be done with VCDS

For controller version, look on label file in vcds in address 42

[Nasir]

That cannot be done with VCDS

Thanks. I'll stick to using the mirror switch then.

[SI-R32]

That cannot be done with VCDS

Thanks. I'll stick to using the mirror switch then.

its done via firmware changes inside the controller with some aftermarket software possibly VAG CAN Pro, either some clever sod can manipulate the coding or the vag can people provide a new flash for the existing firmware.

or for around 80 quid you can just use a SEAT door module on the drivers side.

[RetroRaz]

That cannot be done with VCDS

Thanks. I'll stick to using the mirror switch then.

its done via firmware changes inside the controller with some aftermarket software possibly VAG CAN Pro, either some clever sod can manipulate the coding or the vag can people provide a new flash for the existing firmware.

or for around 80 quid you can just use a SEAT door module on the drivers side.

I bought a seat door controller, going to try it this weekend.

[SI-R32]

I bought a seat door controller, going to try it this weekend.

Do you have a 3 door? PITA if you have a 5 door.

[RetroRaz]

I bought a seat door controller, going to try it this weekend.

Do you have a 3 door? PITA if you have a 5 door.

I have a 5 door. The back doors are locked using the CCM as I have a GEN1 control module.  On my driver door card I have no controls for the rear windows.

I had a read through your guide on r32oc, looks like I wont need to do the metal peice mod for the windows going up and down

I hope its just coding and thats all.

[RetroRaz]

So fitted it today, door mirrors fold on remote, indicators work, haven't checked puddle lights yet. Had an issue with getting thd door to lock, window switch working, lock/unlock button on door , door warning lights and the mirror adjuster. Basically everything on the driver door.

I have a feeling the pin outputs are different on the controller. It might be that the seat door control module i bought is gen2 or gen3.  And my vw one was a gen1.

Going to research it further

Sent from my SM-G928F using Tapatalk

[jason_rmh]

Is yours 3 or 5 door? I'll be doing this soon hopefully. Good work!

[SI-R32]

So fitted it today, door mirrors fold on remote, indicators work, haven't checked puddle lights yet. Had an issue with getting thd door to lock, window switch working, lock/unlock button on door , door warning lights and the mirror adjuster. Basically everything on the driver door.

I have a feeling the pin outputs are different on the controller. It might be that the seat door control module i bought is gen2 or gen3.  And my vw one was a gen1.

Going to research it further

Sent from my SM-G928F using Tapatalk

that's exactly what it will be, if yours is gen 1 then the SEAT module will be gen 2/3 if you want copies of the wiring diagrams to convert the pin outputs send me an email address i can send a pdf to and i'll fire them over

[RetroRaz]

Is yours 3 or 5 door? I'll be doing this soon hopefully. Good work!

its a 5 door but I have manual windows on the rears. Apparently theres not many 5 door mk5's with manual rear windows.

[RetroRaz]

So fitted it today, door mirrors fold on remote, indicators work, haven't checked puddle lights yet. Had an issue with getting thd door to lock, window switch working, lock/unlock button on door , door warning lights and the mirror adjuster. Basically everything on the driver door.

I have a feeling the pin outputs are different on the controller. It might be that the seat door control module i bought is gen2 or gen3.  And my vw one was a gen1.

Going to research it further

Sent from my SM-G928F using Tapatalk

that's exactly what it will be, if yours is gen 1 then the SEAT module will be gen 2/3 if you want copies of the wiring diagrams to convert the pin outputs send me an email address i can send a pdf to and i'll fire them over

Thanks SI. my email address is hitman_dubz@hotmail.co.uk

Appreciate it buddy

[RetroRaz]

Little preview here

https://www.instagram.com/p/BCA5utku2r4/

Sent from my SM-G928F using Tapatalk