Going De-cat question. Again...

[K9]

guys, i'm going next week Milltek de-cat with a Milltek cat-back non res.
Bought new Dp sealing with new Dp bolts, is there anything else i need? 

How about the fueling i readed about when you de-cat your gti? Currently on remap stage 1+ oem HPFP and intake.

Thank you!

[Paradox1]

You should change the gasket between the downpipe and turbo

[Dan_FR]

Enjoy the EML light until you go back for stage 2 mapping

[K9]

Enjoy the EML light until you go back for stage 2 mapping

A guy at facebook gti parts told me he had installed same setup without a spacer and standard map without EML light

Skickat från min SM-G900F via Tapatalk

[Dan_FR]

Yeah good luck with that 

[r5gtt]

De cat always brings EML on as ive had it too. spacer works but light still comes on so from time to time it will need clearing that's why I kept a maxi scan in car for years 

[K9]

where in VCDS can i read MAF when doing some pulls?

[r5gtt]

where in VCDS can i read MAF when doing some pulls?

http://forums.vwvortex.com/showthread.php?1265064

[K9]

where in VCDS can i read MAF when doing some pulls?

http://forums.vwvortex.com/showthread.php?1265064

what should i look at if the car is running lean etc?

[Dan_FR]

Not the maf reading. Maf reading alone is useless.

Log the ma,f lambda correction and the actual & specified lambda values.

Why do you suspect the car is running lean?

[K9]

Not the maf reading. Maf reading alone is useless.

Log the ma,f lambda correction and the actual & specified lambda values.

Why do you suspect the car is running lean?

no't suspecting, just want to check. My tuner told me that i can check the MAF so it's giving enough when going de-cat

[r5gtt]

Don't you fret buddy just get the job done and be hpoy as I'm looking into a 200 cell de cat and 3 inch dp now and hopefully the seller isn't wasting my time.

[K9]

Don't you fret buddy just get the job done and be hpoy as I'm looking into a 200 cell de cat and 3 inch dp now and hopefully the seller isn't wasting my time.

at the weekend i will get the DP changed.

[r5gtt]

Don't you fret buddy just get the job done and be hpoy as I'm looking into a 200 cell de cat and 3 inch dp now and hopefully the seller isn't wasting my time.

at the weekend i will get the DP changed.

Good one 

The clown sold it after saying he'll sell it to me 

Never mind I'll find another one some were 

[K9]

Don't you fret buddy just get the job done and be hpoy as I'm looking into a 200 cell de cat and 3 inch dp now and hopefully the seller isn't wasting my time.

at the weekend i will get the DP changed.

Good one 

The clown sold it after saying he'll sell it to me 

Never mind I'll find another one some were 

i boight a brand new Milltek TBE de-cat non res cat-back as new is new