LED rear lights - Dectane urban style

[axsweb]

I'll get some in the morning @r5gtt. The wiring is easy but feeding the wires through took time


Sent from my iPad using Tapatalk

[r5gtt]

I'll get some in the morning @r5gtt. The wiring is easy but feeding the wires through took time


Sent from my iPad using Tapatalk

Cheers @axsweb. yes that's the difficult part feeding the wires through the grommet.

[axsweb]

The wires are fed through the original cover can do it but takes time. The three colour wires are so the lights inside the tail gate light up. The reverse wire i had to make another connection from the left so it could reach to the right side. You have to make extra two wires.


Sent from my iPad using Tapatalk

[r5gtt]

NOOOOOOOOOOOOOO 

Why did you cut through the rubber grommet  You could have fed the wires through it with a coat hanger or similar as this looks awful @axsweb

[Juswoo98]

You can't swap around the reverse and the fog cables as it's illegal to have a Fog light on the opposite side. The only way to get around this is to either swap the lens covers OR buy a red bulb to replace, but that means the reverse light will be red also.

Not a simple solution either way

[axsweb]

NOOOOOOOOOOOOOO 

Why did you cut through the rubber grommet  You could have fed the wires through it with a coat hanger or similar as this looks awful @axsweb

Oops.... Oh well I'll live with it now.
I didn't know it was illegal.

[r5gtt]

NOOOOOOOOOOOOOO 

Why did you cut through the rubber grommet  You could have fed the wires through it with a coat hanger or similar as this looks awful @axsweb

Oops.... Oh well I'll live with it now.
I didn't know it was illegal.

You could get life 

[axsweb]

Managed to swap the lens cover over by heating the lights from the edges and opening them up. The white lens and red lens clip out and easy to swap over. Then re seal the lights with see through seal and kept them together using masking tape for few hours and there fine now. No water leaks inside.


Sent from my iPad using Tapatalk

[r5gtt]

Managed to swap the lens cover over by heating the lights from the edges and opening them up. The white lens and red lens clip out and easy to swap over. Then re seal the lights with see through seal and kept them together using masking tape for few hours and there fine now. No water leaks inside.


Sent from my iPad using Tapatalk

looking good 

[gunnellgti]

Managed to swap the lens cover over by heating the lights from the edges and opening them up. The white lens and red lens clip out and easy to swap over. Then re seal the lights with see through seal and kept them together using masking tape for few hours and there fine now. No water leaks inside.


Sent from my iPad using Tapatalk

looking good 

These looks really cool, any pictures with the lights on / in the dark ?!

[axsweb]

Managed to swap the lens cover over by heating the lights from the edges and opening them up. The white lens and red lens clip out and easy to swap over. Then re seal the lights with see through seal and kept them together using masking tape for few hours and there fine now. No water leaks inside.


Sent from my iPad using Tapatalk

looking good 

These looks really cool, any pictures with the lights on / in the dark ?!

Yeah



Sent from my iPad using Tapatalk

[ChazGTI]

Looked at these many times, glad to see that its possible to switch the lights around! They look great 

[gunnellgti]

@axsweb Wow they look awsome!

[r5gtt]

Still prefer the skyline mod in my signiture 

[horsemeat]

Those look great in red!!

I'd only seen the heavily smoked versions before (which aren't really for me) but those look rather good

Where did you get them from @axsweb ? These: http://www.ebay.co.uk/itm/360763016539 ?