Make a donation
« previous next »
Pages: [1] 2   Go Down

Author Topic: Run the big ends!!  (Read 4149 times)

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Run the big ends!!
« on: April 25, 2016, 09:53:37 pm »
So today after getting my timing belt fixed for the second time and finally getting my map sorted the STOP ENGINE light came on when I turned it off and done all the checked oil and stuff I rested it and the big ends are f*cked ! 100% rattling ! Wat would course the big ends to fail ? Besides no oil ? Because there was plenty in the sump
Logged

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=nl4n7n3pfqfdo6gnjmkm5tm9nr&/topic,19740.0.html
Re: Run the big ends!!
« Reply #1 on: April 25, 2016, 10:57:56 pm »
Well if the big end is rattling it's the shell bearings most likely. Not good :-(
Logged

Offline dronners

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 34
  • Posts: 317
Re: Run the big ends!!
« Reply #2 on: April 25, 2016, 11:48:44 pm »
my guess is oil starvation from a blocked pickup
Logged

Offline Dan_FR

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 132
  • -Receive: 189
  • Posts: 1845
  • wait...what?
    • Email
Re: Run the big ends!!
« Reply #3 on: April 26, 2016, 06:38:30 am »
Oil starvation. Either th  pickup or the oil pump itself.
Logged
TFSI... Revo Stage 2+... . WMI.... VCDS HEX + CAN, MPPS, VAG Commander & VAG tacho - South Wales

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Run the big ends!!
« Reply #4 on: April 26, 2016, 08:51:34 pm »
Ok took the sump off the find my oil pump chain in a hundred bits and my balancing shaft has seized ! Snapping my chain and taking the crank sprocket teeth with is so... I basically need a bottom end !!!! What engine codes and cars have the same bottom end as mine ? It's an AXX
Logged

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Run the big ends!!
« Reply #5 on: April 27, 2016, 07:54:35 am »
You will need a whole engine. The swarf will have travelled through to the head and fooked it. Turbo bearings may be shot too.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Run the big ends!!
« Reply #6 on: April 27, 2016, 07:43:18 pm »
Managed to source a BWA engine but is it a straight swap and will it run an AXX ecu ?
Logged

Offline Ricky123

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 27
  • Posts: 377
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,98436.0.html
Re: Run the big ends!!
« Reply #7 on: April 27, 2016, 07:48:07 pm »
Yeo you can combine axx and bwa engines. Your ecu will also be fine. Have a look threw my posts I have already done it myself. I used a bwa bottom end and axx head.
Logged
56 mk5 ed30 3dr
57 mk5 1.9 TDi match
22 a3 s-line competition 45 tfsiE
09 Suzuki GSXR 1000 (road going track sl*g)

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Run the big ends!!
« Reply #8 on: April 27, 2016, 07:49:33 pm »
Iv got a deal on a complete BWA engine and gearbox for a complete pull out and drop in
Logged

Offline Juliand

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 18
  • Posts: 358
    • Email
Re: Run the big ends!!
« Reply #9 on: April 28, 2016, 08:17:15 am »
How much are you looking at for that - curious......in case of future failure  :thinking:
Logged

Offline DANBOY66

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 55
  • Posts: 1137
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,74301.0.html
Re: Run the big ends!!
« Reply #10 on: April 28, 2016, 08:25:17 am »
i have sold a few now bwa with 90k about £1000

i sold a 65k at £1200 a couple of weeks ago  :happy2:

also axx with 80k for £800 but you would be mad to buy an axx they are time bombs  :laugh:
Logged
Dan..

Seat Ibiza cupra 06 1.8T GTX2867R GEN2 track toy in the making
Passat TDI 170 DSG the Family mini cab

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Run the big ends!!
« Reply #11 on: April 28, 2016, 07:20:33 pm »
I paid 900 for full engine and gearbox with all the stuff still on it happy days so is the BWA engine any better or will these go bang as well ?
Logged

Offline vag

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 67
Re: Run the big ends!!
« Reply #12 on: April 28, 2016, 08:46:40 pm »
This is exactly why i replaced my oil pump chain and tensioner for piece of mind, hopefully you get it sorted soon
Logged

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Run the big ends!!
« Reply #13 on: April 28, 2016, 09:01:04 pm »
I phoned TPS and they wanted 1013 for oil pump and balancing shaft housing ! That's a new engine !
Logged

Offline DANBOY66

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 55
  • Posts: 1137
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,74301.0.html
Re: Run the big ends!!
« Reply #14 on: April 29, 2016, 08:12:30 am »
bwa are a great engine  :happy2:

when i sell an engine its complete everything except the gearbox  :wink:
Logged
Dan..

Seat Ibiza cupra 06 1.8T GTX2867R GEN2 track toy in the making
Passat TDI 170 DSG the Family mini cab
Pages: [1] 2   Go Up
« previous next »