Make a donation

Author Topic: Reflex Silver Mk5 Golf GTI  (Read 25071 times)

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Reflex Silver Mk5 Golf GTI
« on: June 01, 2016, 11:31:49 pm »
Hi guys, I'm relatively new member to this forum, I'm a member on detailingworld so have decided to join here too.

Picking the new car up tomorrow so thought I would start a new project thread on here.

Having had the Fabia for just under 2 years I thought it was time for a change, I fancied a 3 door petrol hatchback and had a look at a few options including;

Ford Focus st
Mini Cooper s john cooper works
Audi s3
Volkswagen golf gti

I finally settled on the one I wanted, its an 06 plate 74k 3dr reflex silver Mk5 Golf GTI,

Admittedly I would have liked one with a slightly better spec but finding one that is mechanically as spot on as this one was proving very difficult, this one has Full VW Service History with the cam belt and waterpump being replaced by VW back in January and looks like it had been cared for, it ticked all the right boxes in that sense and theres always parts that I can retrofit like cruise control.

I have a few plans for the car, mainly little cosmetic touches to make the car my own so will hopefully update this thread as I go along, my aim with this car is to keep it a long time and look after it as well as I can like I have with my two previous cars.

The dealers pictures

media by jamie kirk, on Flickr

media2 by jamie kirk, on Flickr

media3 by jamie kirk, on Flickr

media4 by jamie kirk, on Flickr

media5 by jamie kirk, on Flickr

media6 by jamie kirk, on Flickr

media7 by jamie kirk, on Flickr

media8 by jamie kirk, on Flickr

media9 by jamie kirk, on Flickr

media10 by jamie kirk, on Flickr

media11 by jamie kirk, on Flickr

media12 by jamie kirk, on Flickr

media13 by jamie kirk, on Flickr

media14 by jamie kirk, on Flickr

media15 by jamie kirk, on Flickr

Jamie
« Last Edit: August 02, 2017, 04:32:53 pm by JamieKirk95 »

Offline prp74

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 37
  • -Receive: 126
  • Posts: 1354
Re: Reflex Silver Mk5 Golf GTI
« Reply #1 on: June 02, 2016, 03:01:02 pm »
Looks like a clean example. You won't be disappointed with the Golf  :happy2:
mk5 Graphite Blue GTI - Leathers, Xenons, MFD2, PDC, Boot Pop - SOLD
mk7 Pure White GTI - Performance Pack, Xenons, DSG, Leathers, Pro Nav, Dynaudio, Self Park, Keyless, 18" OZ Ultraleggera

Offline Martk19871

  • Always Involved
  • ****
  • Thank You
  • -Given: 27
  • -Receive: 14
  • Posts: 188
  • Va Va Voom
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,100145.msg983012.html#msg983012
Re: Reflex Silver Mk5 Golf GTI
« Reply #2 on: June 02, 2016, 08:07:24 pm »
Nice mate, any plans? I've got a Reflex Silver myself  :happy2:

Offline ChrisGT

  • Always Involved
  • ****
  • Thank You
  • -Given: 39
  • -Receive: 40
  • Posts: 379
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,106577.0.html
Re: Reflex Silver Mk5 Golf GTI
« Reply #3 on: June 02, 2016, 08:10:59 pm »
Looking good man, I'm on DW too (mumbles)  :happy2:

Chris
It wouldn't be fun if it was easy, I just wish it wasn't this much fun.

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #4 on: June 06, 2016, 11:30:29 pm »
Nice mate, any plans? I've got a Reflex Silver myself  :happy2:

Hi mate, only the usual small cosmetic touches, just really enjoying the car at the minute instead

So after picking the car up on Thursday I have been enjoying the car, save to say I love it! So glad I made the change now, really happy:) Few surprises with the car too, from the test drive I noticed the sound of the exhaust was slightly different to standard so thought it had been altered, maybe a centre removed or something along the lines as the exhaust was that dirty I couldn't see any markings on it, however I looked really closely when I got the car back home and noticed the words Miltek on each tip:) I was so happy with the discovery as it really is a nice exhaust, not too loud when just driving around but put your foot down and you know about it:D

After reading a number of different threads and signing up on mk5gti.co.uk I then started looking around at things I could do.

The first thing I saw was the euro cup holder mod which I really like the look of, it really tidies the interior and makes it look complete.

New these parts go for around £80 so I decided to look for alternatives, this led me looking to breakers yards for golfs that had them fitted from factory, I took the trip to Sheffield and managed to find one and buy it.

Heres the car I took it from

IMG_5441 by jamie kirk, on Flickr

IMG_5442 by jamie kirk, on Flickr

IMG_5443 by jamie kirk, on Flickr

All removed

IMG_5444 by jamie kirk, on Flickr

IMG_5445 by jamie kirk, on Flickr

All cleaned up

IMG_5447 by jamie kirk, on Flickr

IMG_5448 by jamie kirk, on Flickr

IMG_5449 by jamie kirk, on Flickr

IMG_5450 by jamie kirk, on Flickr

IMG_5451 by jamie kirk, on Flickr

This will like the finished product

IMG_5446 by jamie kirk, on Flickr

The next thing I went about changing was the interior and number plate lights to LEDs

IMG_5524 by jamie kirk, on Flickr

IMG_5525 by jamie kirk, on Flickr

Boot

IMG_5526 by jamie kirk, on Flickr

Rear lights

IMG_5528 by jamie kirk, on Flickr

Front interior lights

IMG_5529 by jamie kirk, on Flickr

IMG_5530 by jamie kirk, on Flickr

I have got to change the footwells, glovebox and vanity lights but there is no rush on these,

The next thing I decided was, GTI inserts for the seats to fill the gap, really happy with this mod

Before

IMG_5531 by jamie kirk, on Flickr

After

IMG_5532 by jamie kirk, on Flickr

IMG_5534 by jamie kirk, on Flickr

Next up was to tackle the Miltek, used wire wool and mercury, will do more on it but was just a quick tidy up

IMG_5535 by jamie kirk, on Flickr

IMG_5536 by jamie kirk, on Flickr

IMG_5537 by jamie kirk, on Flickr

A 50:50 of sorts, not 100% yet but happy for the minute

IMG_5538 by jamie kirk, on Flickr

Will try and update the thread when I can
« Last Edit: August 02, 2017, 12:03:33 am by JamieKirk95 »

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #5 on: June 22, 2016, 04:54:35 pm »
So the other day I went about changing a few little things on the interior just to smarten up the interior IMO.

One of the first parts I had sourced for the car was a darkened hazard switch.

IMG_5547 by jamie kirk, on Flickr


First I used a trim removal tool to release the cover of the vent

IMG_5548 by jamie kirk, on Flickr

IMG_5549 by jamie kirk, on Flickr

I then removed the inner casing which was held in place by 1 t20 at the rear

IMG_5550 by jamie kirk, on Flickr

I then removed the air vents, pushed out the old hazard switch and swapped it for the new one

IMG_5551 by jamie kirk, on Flickr

IMG_5552 by jamie kirk, on Flickr

All parts now back in place

IMG_5553 by jamie kirk, on Flickr

IMG_5554 by jamie kirk, on Flickr

The next part was a sort of trial run for how easy the armrest is to fit, originally I had planned to do this when I fit either my iPod adapter or rcd510 and euro cup holder however I'm still undecided which route I want to take so thought i'd give it a try anyway.

This is how the old trim piece looked

IMG_5556 by jamie kirk, on Flickr

I thought the larger cup holder at the rear was great for big sports bottles however i felt that the little trays were a little useless and thought the armrest would come in handy.

Coming from the fabia which had one cup holder i'm finding the golf has so much more clever little space, both door cards have a cup holder which can fit them, there are two cup holders in the centre console and now i'll have two more in the rear of the armrest so you just can't compare the two:lol:

I then removed the mats from the cup holder which had 2 t20 torx screws and the tray bit held one so I unscrewed them and the unit simply comes away

IMG_5559 by jamie kirk, on Flickr

IMG_5560 by jamie kirk, on Flickr

I then removed the handbrake cover as I knew the armrest would not fit on whilst it was still in place

IMG_5561 by jamie kirk, on Flickr

I didn't get any photos of me putting in the armrest but only have the one fitted so far, please excuse the state of the interior but I had planned to clean it all up properly once I had fitted the armrest

IMG_5564 by jamie kirk, on Flickr

The last job was to clean up the steering wheel, it was very shiny at the top so I gave it a few wipes with dr leather wipes, I was amazed at how much dirt came off in the first two or three wipes, I then continued and then used a microfibre to wipe off the excess. Heres the finished result

IMG_5576 by jamie kirk, on Flickr

Jamie
« Last Edit: August 02, 2017, 12:05:08 am by JamieKirk95 »

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #6 on: December 30, 2016, 11:01:21 pm »
Will try and update this when I can.

Offline FrameSet

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 7
  • Posts: 121
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,102535.0.html
Re: Reflex Silver Mk5 Golf GTI
« Reply #7 on: January 04, 2017, 05:42:45 pm »
Good job on the interior bits! The armrests really make a difference on these cars I think!

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #8 on: February 13, 2017, 09:41:16 pm »
Having been quite busy recently I really would like to update this more than I do at the minute so here goes!

So having asked VW about servicing I was told on mine they would do an Oil service for £154 as the last one was an interval service, I was not happy with paying that for basically an oil change and filter. So knowing that I aim to keep this car for a long time I decided that I will be do all the services from now on and will take pictures and evidence them in a folder that I will make.

So I got in contact with TPS and put an order in for the following;

Oil filter & sump plug
Fuel filter
Pollen filter
Cam follower & o'ring
PCV valve

I ordered the following online;

Castro edge 5w30 oil
NGK Iridium IX BKR7EIX Spark plugs

I also used an air compressor to fully clean out my air filter instead of the cleaning kit I had purchased, the next service I do I plan to get a new filter on it anyway.

IMG_5291 by jamie kirk, on Flickr

Car brought into the garage

IMG_5304 by jamie kirk, on Flickr

IMG_5380 by jamie kirk, on Flickr

Oil change & Filter

So first thing we did was to jack the car up and put it on axle stands, we took the under tray off and took the old sump plug out.

IMG_5306 by jamie kirk, on Flickr

IMG_5307 by jamie kirk, on Flickr

IMG_5308 by jamie kirk, on Flickr

IMG_5309 by jamie kirk, on Flickr

We then used some fresh oil to try and drain every last bit of the old engine oil.

IMG_5311 by jamie kirk, on Flickr

Oil filter, first up was to unscrew the dust cap off the bottom of the oil filter, then you need to push up the orange piece of plastic to drain out the old oil still left inside. Then a 38mm socket will remove the filter casing with the filter inside.

IMG_5335 by jamie kirk, on Flickr

IMG_5336 by jamie kirk, on Flickr

Old filter

IMG_5337 by jamie kirk, on Flickr

Old vs. New

IMG_5338 by jamie kirk, on Flickr

New oil used on the seal

IMG_5339 by jamie kirk, on Flickr

New filter in place

IMG_5340 by jamie kirk, on Flickr

Back in position

IMG_5341 by jamie kirk, on Flickr

IMG_5367 by jamie kirk, on Flickr

IMG_5368 by jamie kirk, on Flickr

IMG_5369 by jamie kirk, on Flickr

Spark Plugs

IMG_5326 by jamie kirk, on Flickr

Removing the clips

IMG_5315 by jamie kirk, on Flickr

Removed

IMG_5316 by jamie kirk, on Flickr

Coils Removed

IMG_5323 by jamie kirk, on Flickr

Old sparks

IMG_5328 by jamie kirk, on Flickr

New vs. Old

IMG_5329 by jamie kirk, on Flickr

IMG_5330 by jamie kirk, on Flickr

Coils back in place

IMG_5333 by jamie kirk, on Flickr

IMG_5334 by jamie kirk, on Flickr

PCV Valve

IMG_5342 by jamie kirk, on Flickr

New vs. Old

IMG_5343 by jamie kirk, on Flickr

Back in place

IMG_5362 by jamie kirk, on Flickr

Hoses connected

IMG_5363 by jamie kirk, on Flickr

Cam follower change

Removed the wiring harnesses

IMG_5344 by jamie kirk, on Flickr

IMG_5345 by jamie kirk, on Flickr

At this point I placed a microfibe cloth just under the fuel pump to catch any fuel, I also removed the plastic cover and inserted an an alan key to drain out the fuel.

IMG_5346 by jamie kirk, on Flickr

I then used a 13mm spanner to remove the following

IMG_5347 by jamie kirk, on Flickr

IMG_5348 by jamie kirk, on Flickr

I then used a 17mm spanner to loosen the second nut and allowed this to slide down the metal pipe

IMG_5350 by jamie kirk, on Flickr

The fuel pump then needed 3 screws coming out with a t30 head

IMG_5351 by jamie kirk, on Flickr

IMG_5352 by jamie kirk, on Flickr

The fuel pump was then ready to come away to expose the cam follower, removed it;

IMG_5353 by jamie kirk, on Flickr

IMG_5354 by jamie kirk, on Flickr

IMG_5356 by jamie kirk, on Flickr

IMG_5358 by jamie kirk, on Flickr

Old vs. New

IMG_5359 by jamie kirk, on Flickr

IMG_5360 by jamie kirk, on Flickr

Fuel Filter

New 6.6 Bar fuel filter

IMG_5364 by jamie kirk, on Flickr

IMG_5365 by jamie kirk, on Flickr

IMG_5366 by jamie kirk, on Flickr

Pollen Filter

IMG_5382 by jamie kirk, on Flickr

First thing was to remove the 3 t20 retaining screws just under the glove box

IMG_5383 by jamie kirk, on Flickr

Then undo the two retaining screws

IMG_5384 by jamie kirk, on Flickr

IMG_5386 by jamie kirk, on Flickr

Then locate the pollen filter and slide it to the left

IMG_5387 by jamie kirk, on Flickr

Old filter

IMG_5388 by jamie kirk, on Flickr

Old vs. New

IMG_5389 by jamie kirk, on Flickr

Thanks

Jamie
« Last Edit: August 02, 2017, 12:07:26 am by JamieKirk95 »

Offline S800BRN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 15
  • -Receive: 27
  • Posts: 598
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #9 on: February 13, 2017, 10:18:51 pm »
Good effort on this so far, mate!

Offline Octoparrot

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 102
  • Posts: 999
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #10 on: February 13, 2017, 10:23:04 pm »
Looks like a very nice example, good job on the service.  :happy2:

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #11 on: February 13, 2017, 10:55:18 pm »
Looks like a very nice example, good job on the service.  :happy2:

Thank you, just gradually adding small little touches to it and then waiting on vw for the wings then it'll be a really good one :smiley:

Good effort on this so far, mate!

Thank you mate appreciate it!

Offline prp74

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 37
  • -Receive: 126
  • Posts: 1354
Re: Reflex Silver Mk5 Golf GTI
« Reply #12 on: February 14, 2017, 10:46:06 am »
Nice example you have there. Well done on the service as well. Wish I had the knowledge to do mine myself as well  :congrats:
mk5 Graphite Blue GTI - Leathers, Xenons, MFD2, PDC, Boot Pop - SOLD
mk7 Pure White GTI - Performance Pack, Xenons, DSG, Leathers, Pro Nav, Dynaudio, Self Park, Keyless, 18" OZ Ultraleggera

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #13 on: February 14, 2017, 03:50:41 pm »
Nice example you have there. Well done on the service as well. Wish I had the knowledge to do mine myself as well  :congrats:

Thank you and I used to think it would be hard to do it but if you've got a decent tool box and then a 38mm socket for the oil filter then its really a lot simpler thank you'd think!

Offline JamieKirk95

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 11
  • Posts: 120
    • Email
Re: Reflex Silver Mk5 Golf GTI
« Reply #14 on: February 15, 2017, 10:36:22 pm »
When I got the Golf I first went to VW in June when I first got the car to put in a claim about the rust on the wings as they are covered under the 12 year bodywork guarantee, since then I have chased them up every couple of weeks to see how they was getting on.

Anyway to cut the long story short I go a phone call yesterday saying my claim had been approved and they are going to replace both wings. They need the car monday to friday next week to put two new front wings modify the new sponges underneath to prevent the problem occurring again and then to blend the panels.

I am taking the car in tomorrow and they will be giving me a courtesy car until the job is done. So all in all very happy!!

The wings currently;

Off side

IMG_5410 by jamie kirk, on Flickr

IMG_5411 by jamie kirk, on Flickr

IMG_5412 by jamie kirk, on Flickr

IMG_5413 by jamie kirk, on Flickr

Near side

IMG_5414 by jamie kirk, on Flickr

IMG_5415 by jamie kirk, on Flickr

IMG_5416 by jamie kirk, on Flickr

IMG_5417 by jamie kirk, on Flickr
« Last Edit: August 02, 2017, 12:09:34 am by JamieKirk95 »