Make a donation

Author Topic: Handbrake rattle  (Read 959 times)

Offline theminty1

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 8
  • Posts: 77
    • Email
Handbrake rattle
« on: June 09, 2016, 09:23:58 am »
As above a really quite annoying rattle buzzing sound from the handbrake lever. If you push the lever slight to the side it stops. Anyone have a fix........apart from turning the music up louder  :laugh:
I do have the plastic lever trim off and can see the spring etc, just looking for a tried and tested solution
140 BKD GT TDi  5dr

Offline david25

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 7
  • Posts: 190
    • Email
Re: Handbrake rattle
« Reply #1 on: June 09, 2016, 05:07:14 pm »
I had this and found a fix on another forum, the fix as I remember was to thread a piece of sponge or dishcloth type material between the spring and the metal post it coils around.

I used a piece maybe 5mm wide, this stops the spring knocking on the metal post.

Offline jayha11

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 23
  • Posts: 285
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,97064.0.html
Re: Handbrake rattle
« Reply #2 on: June 09, 2016, 05:27:18 pm »
I took the plastic cover off and packed it with foam. worked a treat and no more rattles anymore  :smiley:
Mk5 GTI > S3 8P > Cupra 300 > Cupra 290 > Mk5 R32

Offline theminty1

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 8
  • Posts: 77
    • Email
Re: Handbrake rattle
« Reply #3 on: June 10, 2016, 08:33:07 am »
Cheers lads, I saw the foam thing although it was for the MK4 Golf. Will give go.  :happy2:
140 BKD GT TDi  5dr

Offline theminty1

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 8
  • Posts: 77
    • Email
Re: Handbrake rattle
« Reply #4 on: June 13, 2016, 11:12:22 am »
Over the weekend had a look at this. Applied loom tape around the plastic sleeve the goes between the aluminium handbrake lever and the sleeve as it rattled, so not around the actual button itself. Applied 3 bits of acoustic cloth  (read anything you can get your paws on) between the handbrake cutouts such that it applies gentle pressure on the long spring that is used for the button. Now sweet. Well pleased   :laugh:
Thanks lads
140 BKD GT TDi  5dr