Make a donation

Author Topic: Tappet/Rattle Noise  (Read 4050 times)

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Tappet/Rattle Noise
« on: January 23, 2020, 07:23:46 pm »
I've noticed a tappet/rattle noise coming from the engine when starting the car from cold, anyone any idea on what could be causing this and best thing for fixing it?
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline bobby_fodge

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 22
  • -Receive: 38
  • Posts: 842
    • Email
Re: Tappet/Rattle Noise
« Reply #1 on: January 23, 2020, 07:35:56 pm »
Which side of the engine is it coming from? Passenger side could be chain.

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Re: Tappet/Rattle Noise
« Reply #2 on: January 24, 2020, 09:25:40 am »
Which side of the engine is it coming from? Passenger side could be chain.

Its not coming from any one side in particular, evenly along the engine block....if that makes sense??
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8354
Re: Tappet/Rattle Noise
« Reply #3 on: February 08, 2020, 04:56:50 pm »
How long does the rattle last?  If it goes after a few seconds, probably just the hydraulic lifters.  My engine does that over winter if the oil is getting on a bit. Swap it out for fresh lube and the noise goes  :happy2:

If it's a more persistent rattle, how old is it?  Is it an early one with the dodgy chain tensioner?


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Re: Tappet/Rattle Noise
« Reply #4 on: February 12, 2020, 08:10:42 pm »
How long does the rattle last?  If it goes after a few seconds, probably just the hydraulic lifters.  My engine does that over winter if the oil is getting on a bit. Swap it out for fresh lube and the noise goes  :happy2:

If it's a more persistent rattle, how old is it?  Is it an early one with the dodgy chain tensioner?

Cheers for the reply, it’s a 12 plate and from my understanding it’s a belt mine rather than the chain?
Left the car with the garage I use and the guy doesn’t reckon it’s anything serious but he couldn’t quite pinpoint what was causing the noise, he said possibly an injector?
I top the oil up every 1000 miles, you think it’s maybe not quite having enough oil in the car? I’m completely useless when it comes to being mechanically minded :doh:
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8354
Re: Tappet/Rattle Noise
« Reply #5 on: February 15, 2020, 02:57:46 am »
A 12 plate is a chain driven engine.  No cam belt.  It's also way past the iffy tensioner problems of the 2009/10 engines, but it could still be chain rattle.

It's hard to be specific without seeing the car but if the rattle disappears quite quickly, it's probably nothing to worry about.   

High pressure fuel pumps are a common failure on the EA888 engine but as you need to top up the oil regularly, I think you can out-rule that.

I think you need to get the garage to verify you don't have chain stretch/tensioner wear which can be done with VCDS and other scan tools.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Re: Tappet/Rattle Noise
« Reply #6 on: February 17, 2020, 08:46:15 pm »
A 12 plate is a chain driven engine.  No cam belt.  It's also way past the iffy tensioner problems of the 2009/10 engines, but it could still be chain rattle.

It's hard to be specific without seeing the car but if the rattle disappears quite quickly, it's probably nothing to worry about.   

High pressure fuel pumps are a common failure on the EA888 engine but as you need to top up the oil regularly, I think you can out-rule that.

I think you need to get the garage to verify you don't have chain stretch/tensioner wear which can be done with VCDS and other scan tools.

You sure about the chain mate? My service book has toothed belt change @52k miles
It’s an edition 35 I’ve got if that makes any difference on your thinking?
Wasn’t aware that I had a high pressure fuel pump (clueless really on the car apart from driving it  :signLOL:)
Will look into getting it plugged into VCDS tho  :happy2:
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Tappet/Rattle Noise
« Reply #7 on: February 18, 2020, 03:04:36 pm »
@Eighteen88  be careful the
Mk6 GTI has the newer engine EA888
Mk6 GTI Edition 35 has the older EA113 engine (as found in similar guise in Edition 30 mk5 , s3 etc)

As an edition 35 it has the older engine which has a different set of 'issues' compared to 'normal' mk6 gti which changes @Pudding  responses above.

have a look on youtube for tensioner rattle on edition 30 (or mk5)  for examples, how many miles on your car?   normal to start rattling at 50k miles onwards and need changing at 100k
but not to be confused with the 'tensioner' problem that 'normal' mk6 faces which is a totally different issue

Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Re: Tappet/Rattle Noise
« Reply #8 on: February 18, 2020, 03:34:13 pm »
@Eighteen88  be careful the
Mk6 GTI has the newer engine EA888
Mk6 GTI Edition 35 has the older EA113 engine (as found in similar guise in Edition 30 mk5 , s3 etc)

As an edition 35 it has the older engine which has a different set of 'issues' compared to 'normal' mk6 gti which changes @Pudding  responses above.

have a look on youtube for tensioner rattle on edition 30 (or mk5)  for examples, how many miles on your car?   normal to start rattling at 50k miles onwards and need changing at 100k
but not to be confused with the 'tensioner' problem that 'normal' mk6 faces which is a totally different issue

Many thanks for the response,  the car has done 76k so going by what you say this should be expected?? Is this something I should be concerned about? What needs done to “fix” the issue??
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline Eighteen88

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 233
Re: Tappet/Rattle Noise
« Reply #9 on: February 19, 2020, 08:18:46 pm »
Got the car plugged into vcds today and no issue was found.
Milltek Non Resonated Cat-Back exhaust “edition 35”, Forge PCV Delete, APR Stage 1 Remap & APR DSG Remap, Volkswagen racing intake, Volkswagen racingline sport springs, Audi R8 Coil Pack, GFB DV+

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Tappet/Rattle Noise
« Reply #10 on: February 19, 2020, 09:01:18 pm »
glad to hear it.

At 76k yes Id expect some noise
Concerned no, just budget for getting the chain/tensioner replaced over the next 40k miles (unless it suddenly changes tone etc). Its highly unlikely it will fail just get noisier
The excellent guide is on here : https://www.mk5golfgti.co.uk/forum/index.php/topic,106158.0.html

You can also check the level of 'slack' in the cam chain by checking some VCDS values.

Enjoy
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8354
Re: Tappet/Rattle Noise
« Reply #11 on: February 21, 2020, 04:36:52 pm »
I didn't notice in your signature it's an ED35 and assumed it was a GTI.  In which case, as above, it's the older engine from the MK5 so will be a cambelt + chain.

As mentioned before, if it's just a few seconds of tapping in cold weather after the first startup of the day, it's usually the oil getting a bit old and gloopy.   I have the same engine pretty much in my ED30 and it's the only noise it makes at 140K miles old.  I wouldn't expect your 76K miler to have any significant problems.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D