Dom’s Tornado Red Gti - round two!

[dom069]

Hi everyone,

Those of you who have been on here for a while might remember me. Almost 10 years ago I bought my first Mk5, absolutely loved it for a couple of years and then sold it due to my first child being born within a few months of starting a new job.

Build thread for the old one is here:

https://www.mk5golfgti.co.uk/forum/index.php/topic,85957.0.html

It is the only car that I have owned that I regret selling.

About a year ago I decided that I wanted another one, this time as a toy/project and ended up buying this:







It has 116k miles, really comprehensive service history, heated seats, power folding mirrors etc.

Generally it was pretty tidy, however it was obvious that it needed a rear wheel bearing doing.

I have spent the last 12 months collecting parts for it. Lots of updates to come later

[mjmallia]

Looks clean.

My best mate had bought your old GTI but has been sold on now.

[dom069]

Looks clean.

My best mate had bought your old GTI but has been sold on now.

How long ago was this? I think it’s changed hands a fair few times since I sold it.

[mjmallia]

About a year ago now.

[dom069]

So the car looked clean enough, but after I gave it a good looking over and got it up in the air it was obvious that it needed more than just a wheel bearing.

Both front tyres were down to the cords on the inside edge, the front offside sill had a hole in it, the rear subframe and boot floor looked like it had been sat in the sea, and there were leaks from the rocker cover gasket, vacuum pump and intercooler pipes and the diverter valve diaphragm had a tear in in.

A new o-ring sorted the intercooler pipe:



I ordered a pair of rear wheel bearings, revision g dv and a pair of PS5s:



Replaced the rocker cover gasket and spark plugs:





I fitted the lastest revision pcv and a new cam follower:





I also replaced the vacuum pump seals but didn't take any photos. The car also came with non oem red top coil packs, so they were replaced with oem ones.

[dom069]

While I waited for my welder mate to have time to sort the sill out, I tackled the interior. Other than the drivers seat it was in pretty good condition, but the drivers seat really let it down.

I picked up a full Ed30 interior, gave it a decent clean and fitted it:







I also fitted a cherry red hazard switch, replaced some scuffed trims and fitted a new gear shift boot:





much more to come later

[Jons1001]

Nice work looks great!

[dom069]

I swapped the key case for a Mk7 one:



Tackled the paintwork, which was insanely swirly:









Then went about replacing this mess of an exhaust:





With a non-res Scorpion:





Also fitted a kill all wipers delete:





Had the hole patched up:





I also took the side skirts off to check that no other rust was lurking underneath, thankfully they were solid:





While they were off I decided to smooth/paint them:





A bit of orange peel, but pretty happy with a rattle can result:

[dom069]

Next up I changed the cambelt and did a full service using genuine parts, getting the engine mount bracket out was an absolute nightmare:



While the mount was off I fitted a polybush insert and replaced the bolts:



It had an MOT which showed that it needed a droplink which I replaced:





Then I took it off the road for the winter and started collecting parts:







More to come later...

[SwedeGTI]

Nice GTI, my favorite colour! Any more progress on this?
In the last picture, are those TT arms or  passat ones?

[dom069]

Nice GTI, my favorite colour! Any more progress on this?
In the last picture, are those TT arms or  passat ones?

I’d forgotten that I hadn’t updated this again. I’ll try to get it up to date tomorrow, there are loads more updates.

The arms in the picture are superpro ones which I got for an absolute steal.

[RBS]

Great work 👍🏻
Get that suspension done!
I’m also finally to do that on mine 😅
Enjoy your ride and love to read your thread👍🏻