Make a donation

Author Topic: People With Uprated Sachs Clutch On Mapped Edition 30/Cupra/S3 etc HELP PLEASE  (Read 10371 times)

Offline dan.payne

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 320
    • Email
As soon as its slipped then you know you will need a new flywheel too.. Spending labour and not changing it is just daft.. You may well save the cost first time round, but when it starts slipping again and it takes out your new Sachs bits as a result then its going to get expensive..

I say, do it right, first time.. Then you know you can forget about it..  :smiley:

I though you can inspect the DMF to see if a new one is needed? they have just changed the clutch but not DMF on my mates S3 running more power & now no slip what so ever


My DMF was fine when putting in the new Sachs Clutch and pressure plate. See here:
http://www.mk5golfgti.co.uk/forum/index.php/topic,10651.15.html
GTi Edition 30 Phase 2+ :jumping:


Offline Phil_T

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 254
    • Audi S3
    • Email
As soon as its slipped then you know you will need a new flywheel too.. Spending labour and not changing it is just daft.. You may well save the cost first time round, but when it starts slipping again and it takes out your new Sachs bits as a result then its going to get expensive..

I say, do it right, first time.. Then you know you can forget about it..  :smiley:

I though you can inspect the DMF to see if a new one is needed? they have just changed the clutch but not DMF on my mates S3 running more power & now no slip what so ever


My DMF was fine when putting in the new Sachs Clutch and pressure plate. See here:
http://www.mk5golfgti.co.uk/forum/index.php/topic,10651.15.html

Cant view topic mate


For Sale - Airlift Performance Struts & Accuair Elevel/Ilevel Management - 18" BBS E28 Magnesium Split Wheels, Carbon Fibre Front Splitter
Old Car 2009 Audi S3 365bhp Gone - New Car 2013 C63 Amg Now With 525bhp

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
As soon as its slipped then you know you will need a new flywheel too.. Spending labour and not changing it is just daft.. You may well save the cost first time round, but when it starts slipping again and it takes out your new Sachs bits as a result then its going to get expensive..

I say, do it right, first time.. Then you know you can forget about it..  :smiley:

I though you can inspect the DMF to see if a new one is needed? they have just changed the clutch but not DMF on my mates S3 running more power & now no slip what so ever


My DMF was fine when putting in the new Sachs Clutch and pressure plate. See here:
http://www.mk5golfgti.co.uk/forum/index.php/topic,10651.15.html

Cant view topic mate

Just had the Sachs Uprated clutch pack fitted and Sachs SMF. It has had quite a judder in first and second, but after app. 1000km this has started to dissapear. A bit harder pedal feel but loads more grip as my old DMF was FUBAR, had 184.000km on it, 24.000 being K04 kilometers.

Over the top mod list ;o)