Make a donation

Author Topic: Edition 30 stg1 REVO no other mods : what settings B/T/F ?  (Read 10091 times)

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« on: October 27, 2010, 01:54:57 pm »
ok, the time has come, car will be sporting a new remap soon enough  :party:
no additional modifications just a std Edition 30 , so what settings should it run ?

obviously it will get logged + dyno but for now I just want to know where the limitations are.
I'm assuming Fuel 9 , and a reduced Boost setting as I want to preserve my clutch a little bit.

thanks
John
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #1 on: October 27, 2010, 02:21:33 pm »
John i used to run 6 6 9 on stg 1 and made for a lovely progressive power delivery :happy2:

Offline Poppa Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 40
  • Posts: 1553
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #2 on: October 27, 2010, 02:57:16 pm »
I would go with b6t5f9 if you don't have vcds to do some logging.

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #3 on: October 27, 2010, 03:04:55 pm »
I would go with b6t5f9 if you don't have vcds to do some logging.

John has vcds Dom :happy2:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #4 on: October 27, 2010, 06:08:00 pm »
B6 T6 F9 is for a progressive map.
B1 T6 F9 produces 263 bhp
B5 T6 F9 productes 275 bhp

B7 T5 F9 is what Thor ran at.

EDIT: For some reason, I always thought you had a modded car?
« Last Edit: October 27, 2010, 06:09:53 pm by stealthwolf »

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=3dvm6b1s6mvd90qvs3f5old4iv&/topic,19740.0.html
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #5 on: October 27, 2010, 06:27:32 pm »
I thought that stage one took the ed30 up to 300bhp? Or is that just pub fuelled rumours?

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #6 on: October 27, 2010, 06:28:11 pm »
B6 T6 F9 is for a progressive map.
B1 T6 F9 produces 263 bhp
B5 T6 F9 productes 275 bhp

B7 T5 F9 is what Thor ran at.

EDIT: For some reason, I always thought you had a modded car?

he did he's swaping from APR :smiley:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #7 on: October 27, 2010, 06:38:05 pm »
I thought that stage one took the ed30 up to 300bhp?
Depends on which rollers you run. You could run a stage 1 eddy on two different rollers and get two different results eg 270bhp and 310bhp. Which one are you likely to believe?


The GTI isn't just a machine. It's very much a living, breathing thing.

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=3dvm6b1s6mvd90qvs3f5old4iv&/topic,19740.0.html
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #8 on: October 27, 2010, 06:52:07 pm »
I thought that stage one took the ed30 up to 300bhp?
Depends on which rollers you run. You could run a stage 1 eddy on two different rollers and get two different results eg 270bhp and 310bhp. Which one are you likely to believe?



Well... i suppose id take an average... and its not all about 'peak' power anyway!

Offline SteveS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 14
  • -Receive: 10
  • Posts: 1300
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #9 on: October 27, 2010, 08:09:14 pm »
i ran mine on b7t5f9 got good results

SOLD!! :(
VW GTI Edition 30 No. 0551
Revo Stage2+ (LT) | Evoms Intake, K&N Filter | VWR LSD | Milltek R32 TBE | VWR Engine Mounts | VWR Big Front & S3 Rear Brakes | VWR Springs |  VWR Shortshift | SuperPro Bushes |  Recaro Seats

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=3dvm6b1s6mvd90qvs3f5old4iv&/topic,19740.0.html
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #10 on: October 27, 2010, 08:16:09 pm »
Are the BTF setting 'end user adjustable'.. or are they set at the time of mapping and left?

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #11 on: October 27, 2010, 08:44:06 pm »
cheers guys  :happy2:

car is back running B6 T3 F9 , as Ive got some 97 RON in the tank from a trip up north at the weekend, so awesome had to peg it back after logging showed excessive CF's
apparently its enough to cause an issue, will go T5/6 once got some more vpower in.

rich , you need to get the SPS handset that allows you to adjust the settings through the OBD port. :happy2:
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline Sunglasses Ron

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 11
  • -Receive: 15
  • Posts: 2067
    • Email
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #12 on: October 27, 2010, 09:03:33 pm »
969 FTMFW  :evilgrin: :driver: :signLOL:

Offline Golfgirl

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 23
  • Posts: 614
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #13 on: October 28, 2010, 11:42:52 am »
Mine is set at T5/B7/F9.
« Last Edit: October 28, 2010, 04:54:05 pm by Golfgirl »

FOR SALE!

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Edition 30 stg1 REVO no other mods : what settings B/T/F ?
« Reply #14 on: October 28, 2010, 11:48:47 am »
F3 ???? you sure
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD