Make a donation

Author Topic: HOW TO:- Wrap your front badge... (guaranteed 10bhp increase)  (Read 16396 times)

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
HOW TO:- Wrap your front badge... (guaranteed 10bhp increase)
« on: November 21, 2011, 02:19:27 pm »
Here we go... this is StevenW007s front badge.

You'll need.

1 VW badge
1 Strong knife
1 Very sharpe knife
1 Hair dryer (or gas hob if your brave)
1 piece of vinyl wrap in your choice of colour.

--------------------------------


1 by Rich Wigley, on Flickr

First we need to detach the front. With a strong knife work between the chromed plastic and backing to prise the front away from the back.


2 by Rich Wigley, on Flickr

You will get to the last one and it will be stiff. What you need to do now is flip the badge over and unclip the 2 clips in the centre of the badge.


3 by Rich Wigley, on Flickr

Once you have done this the last clip around the edge will be easy to lift.


4 by Rich Wigley, on Flickr

Get a suitable amount of wrap, in your preferred colour.


5 by Rich Wigley, on Flickr

Carfully place it on the badge and get rid of any air bubbles.


6 by Rich Wigley, on Flickr

Now, gently heat the edge of the wrap so it goes soft and ease the wrap over the edges of the chrome badge.


7 by Rich Wigley, on Flickr


Trim edge of badge to leave about 1cm surplus


8 by Rich Wigley, on Flickr

Make incisions from the corners to the middle of each hole. Fold the wrap back over. Use a heat source to soften the wrap to make it easier.


9 by Rich Wigley, on Flickr

Should end up looking like this. Getting the bit between the V and the W and around the edge of the whole badge to stick is a pain  :fighting:


10 by Rich Wigley, on Flickr

Press the wrapped VW badge back onto its backing.


11 by Rich Wigley, on Flickr

DONE!  :happy2:
« Last Edit: March 11, 2012, 11:05:09 am by richwig83 »

Offline StevenW007

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 67
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #1 on: November 21, 2011, 06:48:46 pm »
Thanks for taking the time to wrap my badge Rich, looks great already, can't wait to get it back and get it on now.

Ste

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6328
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #2 on: November 21, 2011, 10:41:22 pm »
Great instructions...  :happy2:
Without traction power is nothing!

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #3 on: November 22, 2011, 09:16:53 pm »
Looks great, just painted mine instead!  :happy2:


GT Sport - Reflex Silver 2.0 TDI My Build

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #4 on: November 22, 2011, 09:26:19 pm »
I painted my old one but I found that it just got stoned chipped really bad. Mines been wrapped for 25000 miles and looks as good as it did the day I wrapped it.

Of course you can buy a black badge but DIY is more fun!

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #5 on: November 22, 2011, 09:30:33 pm »
I'll upload the Rolling road proof of bhp increase soon.....

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #6 on: November 22, 2011, 09:32:22 pm »
I'll upload the Rolling road proof of bhp increase soon.....

Im really looking forward to seeing the massive increase........


GT Sport - Reflex Silver 2.0 TDI My Build

Offline rdfcpete

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 98
  • -Receive: 52
  • Posts: 2567
    • Email
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #7 on: November 22, 2011, 09:32:57 pm »
... and which Rollers will these be on Rich? :laugh:
Pete


RNS-E LED 2012 | Aux-In | AP Coilovers |  Hawk HPS Pads | Revo Stage 1+
Previous: OEM+ 2006 MK5 Golf GTI 2.0T FSI Steel Grey 3 Door

Offline damoegan

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 33
  • Posts: 1584
    • Email
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #8 on: November 22, 2011, 09:38:01 pm »
 :happy2:

Been meaning to do this since I got the vinyl off you, Rich  :ashamed: Must pull my finger out......

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #9 on: November 22, 2011, 09:39:53 pm »
... and which Rollers will these be on Rich? :laugh:


All shall be revealed in due course. :-)

Offline rdfcpete

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 98
  • -Receive: 52
  • Posts: 2567
    • Email
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #10 on: November 22, 2011, 10:12:49 pm »
:wink:

In all seriousness, very clean job you did. I did my prototype front badge carbon wrap in such a rush before that I didn't even take it out the rear clip casing  :ashamed:
It was black anyway so nothing lost  :rolleye:
Pete


RNS-E LED 2012 | Aux-In | AP Coilovers |  Hawk HPS Pads | Revo Stage 1+
Previous: OEM+ 2006 MK5 Golf GTI 2.0T FSI Steel Grey 3 Door

Offline Little_Dave

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 28
  • Posts: 921
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #11 on: November 23, 2011, 12:17:42 am »
Nice guide Rich  :congrats: feel like i cheated now by just buying a black one and putting it on today  :signLOL:

Dave

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #12 on: November 23, 2011, 12:18:56 am »
:happy2:

Been meaning to do this since I got the vinyl off you, Rich  :ashamed: Must pull my finger out......

You've still not done it?  :mad:

 :grin:

Offline StevenW007

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 67
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #13 on: November 25, 2011, 11:16:32 pm »
Big thanks to Rich for not only taking the time to wrap my badge but for also doing this guide. Badge looks mint. Pics below.

Cheers

Ste




Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=6a98e0pc72mdb52b8dmk3453q4&/topic,19740.0.html
Re: How to wrap you front badge... (guaranteed 10bhp increase)
« Reply #14 on: November 25, 2011, 11:46:45 pm »
Brilliant.

This is exactly what this forum is about.

Rich