Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Retrofitting MDI and standalone Aux-In - RNS510  (Read 8257 times)

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Retrofitting MDI and standalone Aux-In - RNS510
« on: April 01, 2012, 04:51:08 pm »
Hi all

I've just won a bargain on ebay - MDI box with cabling etc for not very much and i'm gna be fitting it in once it arrives, however i'm also going to be fitting in my aux-input....

i've noticed whilst reading up on the wiring however that the MDI plug takes up the aux-in pins...

is there ANY way of retaining a SEPERATE aux-in socket and also the MDI?

(i know i can get an MDI 3.5mm lead, however the MDI's gna be sitting in the glovebox and the aux-in is going to be next to my ESP/TPMS switch so i can plug in my phone to listen to my internet radio...)

what are my options?....

Logged
MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...

Offline StephenED30

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 53
  • Posts: 486
  • Edition 40 No 135
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #1 on: April 01, 2012, 05:32:15 pm »
Logged

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #2 on: April 01, 2012, 05:47:42 pm »
cheers  :happy2:
Logged
MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #3 on: April 01, 2012, 07:23:33 pm »
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline mvb12

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 64
  • Posts: 1539
  • VCDS - Adaptations * Coding * Diagnostics PM Me
    • Email
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #4 on: April 19, 2012, 01:37:10 pm »
Is there any idiots guide to fitting the MDI armrest unit and hooking it up to the RNS510?
Logged
VCDS HEX NET / VCP / ODIS - COVERING LONDON AND MIDLANDS
VCDS - Adaptations * Coding * Diagnostics PM Me
Canbus Gateway - Supply and fit (Stop battery drain issues)

Offline Wragg

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 222
    • Email
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #5 on: April 23, 2014, 01:18:15 pm »
Quote from: mvb12 on April 19, 2012, 01:37:10 pm
Is there any idiots guide to fitting the MDI armrest unit and hooking it up to the RNS510?



How did you get on..
Also got an MDI unit to retro fit..!!
Logged

Offline shoaybmakda

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 54
  • Posts: 1227
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #6 on: January 25, 2016, 01:28:02 pm »
@mvb12 or @Wragg did you guys managed to find a guide on fitting the MDI by any chance?
Logged

Offline mvb12

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 64
  • Posts: 1539
  • VCDS - Adaptations * Coding * Diagnostics PM Me
    • Email
Retrofitting MDI and standalone Aux-In - RNS510
« Reply #7 on: January 25, 2016, 10:59:10 pm »
No but it's piss easy to do. You need to run the loom through the centre console. pop the gear knob gaiter up so you can see where the loom is running and the rest you will figure out once your doing it.


Sent from my iPhone using Tapatalk
Logged
VCDS HEX NET / VCP / ODIS - COVERING LONDON AND MIDLANDS
VCDS - Adaptations * Coding * Diagnostics PM Me
Canbus Gateway - Supply and fit (Stop battery drain issues)

Offline shoaybmakda

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 54
  • Posts: 1227
Re: Retrofitting MDI and standalone Aux-In - RNS510
« Reply #8 on: January 26, 2016, 12:00:52 pm »
Thought that would be the case. just waiting for my new loom to be delivered now  :party:
Logged
Pages: [1]   Go Up
« previous next »