They look great. What paint did you use? and how much prep work was involved.
Prep work is the hardest and most important part of it,
Used medium-fine wet sandpaper to give everything a really good sanding, also used brake Caliper Cleaner,
Gave Calipers and Hub's a thorough cleaning and wiped dry,
To spray the hubs i masked off everything, including the calipers,
Gave them all 2 coats of Grey Hallfords primer,
Left over night to dry,
Then gave them all 3 coats of Hallfords Black Matte, light sanding in-between coats,
For the calipers i used Hallfords Brake Caliper Paint,
Used 2 brushes, really small one for the hard to reach places,
Gave them 2 coats, 1hr in-between,
Next day before fitting the wheels back on,
I gave the 4 hubs and calipers 1 coat go Gtechniq C5 Alloy Wheel Armour, (just thought it might make it a-bit easier to clean and keep clean)
Don't know how long they will stay like this, but for now i think they look a lot better and easier to clean,
I also sanded, cleaned, primed, and sprayed all the wheel bolts matte black,(3coats) just to take that rusted old look off them.
Hope this helps,
Cheers,
