Yep, happened to me as well.
I have Ed30, with Oettinger stage 2 which they say gives 330hp/460Nm, but I also bought 3-inch downpipe with sportcat, so do not know how much power I have.
4th, 5th, 6th gear, pedal to the metal, from 3000RPM - surge in revs to about 3500, then falling to 3000. No acceleration during the surge.
Now hold the car by the balls, do not let it rev above 3000rpm (trying to save the flywheel), but that is crap, I do not enjoy the power I have.
Right away I went and ordered Sachs clutch kit, which includes the plate (not sintered race type but the organic one) and sachs clutch cover. Trying to stay away from one-mass flywheel, as I wouldn't want to have vibrations and difficult starts, especially in city traffic uphill (Zurich, Switzerland).
Now, though, not sure if that was the right purchase. Should I have bought the sintered plate? Should I have bought the one-mass flywheel? Will the clutch kit I ordered be enough?
Fitting is expensive (not like you guys 300 quid, that's cheap!). And I am fitting it at VW service, they replace some other parts in the clutch (some springs and bolts, I think). Unfortunately, they did not know what QUaife LSD is
so cannot splash more money on that right away. Maybe fit it later with another tuner who's done diffs. It will not cost puny 700 quid, though!
Anyway, back to my organic clutch plate and reinforced clutch cover... Did I make a dumb mistake by ordering these particular parts and by not ordering One-mass flywheel? Who does good DMS flywheels?
