Make a donation

Author Topic: Cheapest place for wind back tool...  (Read 716 times)

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Cheapest place for wind back tool...
« on: June 22, 2013, 10:05:11 am »
Anyone recommend a cheap but decent wind back tool do I can sort my rear brakes? Cheers, Dom
Diesel Daily Hack.

Offline Baz300

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 26
  • Posts: 707
    • Email
Re: Cheapest place for wind back tool...
« Reply #1 on: June 22, 2013, 10:08:54 am »
I got one from eBay similar to this http://www.ebay.co.uk/itm/Right-Handed-BRAKE-BREAK-CALIPER-PISTON-REWIND-TOOL-VW-AUDI-GOLF-SEAT-FORD-MAZDA-/310507187975?pt=UK_Hand_Tools_Equipment&hash=item484babaf07

It done the job.

Are you changing the discs? You will need a m14 splined bit to remove the carrier

Offline paulw123

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 80
  • -Receive: 47
  • Posts: 779
Re: Cheapest place for wind back tool...
« Reply #2 on: June 22, 2013, 01:16:05 pm »
wow that's cheap....I had to get 1 from Halfrauds on a sunday panick jobby, about £32  :ashamed:
GT TDI sport 140 08plate,RCD510 DAB, leather armrest, euro cup holder

Offline GTI-Pirelli

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 27
  • Posts: 221
Re: Cheapest place for wind back tool...
« Reply #3 on: June 22, 2013, 01:41:05 pm »
I got one from eBay similar to this http://www.ebay.co.uk/itm/Right-Handed-BRAKE-BREAK-CALIPER-PISTON-REWIND-TOOL-VW-AUDI-GOLF-SEAT-FORD-MAZDA-/310507187975?pt=UK_Hand_Tools_Equipment&hash=item484babaf07

^ Identical to mine. Just used it about 1/2 hour ago. Works well!

Are you changing the discs? You will need a m14 splined bit to remove the carrier

Make sure you get a short one. I bought one that was too long and it didn't fit in amongst the plethora of suspension parts. It was mounted in a kind of socket (I think most are) so I bashed it out, cut the end off with a grinder then put it back in. Voila, but a faf - easier than getting the bolts out though!
« Last Edit: June 22, 2013, 01:45:20 pm by GTI-Pirelli »
 
2017 Audi S4

Offline DaveB@Vagbremtechnic

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 130
  • Posts: 1315
    • Vagbremtechnic.com
    • Email
Re: Cheapest place for wind back tool...
« Reply #4 on: June 22, 2013, 05:48:03 pm »
The short ones are only available as a set, to buy a M14 spline on its own will probably involve a cut and shut as described ^^^^^

Great adapting tools though! Mines just got the splines sticking out and clears the bolt by about 2mm.


Offline torque777

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 554
Re: Re: Re: Cheapest place for wind back tool...
« Reply #5 on: June 22, 2013, 07:11:18 pm »
I got one from eBay similar to this http://www.ebay.co.uk/itm/Right-Handed-BRAKE-BREAK-CALIPER-PISTON-REWIND-TOOL-VW-AUDI-GOLF-SEAT-FORD-MAZDA-/310507187975?pt=UK_Hand_Tools_Equipment&hash=item484babaf07

It done the job.

Are you changing the discs? You will need a m14 splined bit to remove the carrier
I got the same ...used it yesterday on the jetta ...did a great job as mine were fully wound out :o

sent using my own fingers

Offline MAT ED30

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 82
  • Posts: 5728
  • Vwr fan boy
    • Email
Re: Cheapest place for wind back tool...
« Reply #6 on: June 22, 2013, 07:18:07 pm »
http://bit.ly/Pf4QHj

Get these they are great

Mods yes but way too many to stick in this little box