Tested on a Nissan Skyline we managed an impressive 83 BHP increasement on the track !!
This is a D.I.Y. device and fitted correctly as per instructions will not damage your car , we cannot be held liable for poor fitting and failing too read instructions.The device will "Piggy Back" onto your IAT sensor lead and therefore you must be able to locate this . This is near the air intake / air filter. This is the safest place to connect this device.The sensor you connect to is 2 inches round and 2 inches long and has a plug with 2 leads.This chip mod connects to these too leads.Make sure you can find these.For diesel engines the device may be required to fit to the maf sensor , instructions are included for these.Please leave feedback once recieved so we know that you have received it . We will then be more than happy to help you with fitting if you need it.The colour or size of the module may differ slightly from the one in the photograph but does not affect performance in any way.May be Black or White
Cheap as Chips..... Do you think this would be a linear map or produce a spike in torque
