MAF issue MK6 GTI

[mkmg76]

Afternoon all,

Anyone have a multimeter or power probe and has a few minutes free to check out which wires do what on a MK6 MAF at all please?

Cheers for any help.

Mick.

[fakie1977]

Would help to know where you are.


Sent from my iPhone using Tapatalk

[mkmg76]

Would help to know where you are.


Sent from my iPhone using Tapatalk

Wouldn't make a difference.

I need someone to check THEIR car and report back so I can compare notes.

Do you have a MK6 and a power probe and are willing to help?

[fakie1977]

Sorry thought you were asking for someone to come to you - I shouldn't skim read.


Sent from my iPhone using Tapatalk

[mkmg76]

Sorry thought you were asking for someone to come to you - I shouldn't skim read.


Sent from my iPhone using Tapatalk

We've all done it.

I might have explained a bit better in fairness to avoid confusion but never entered my head that someone would read it that way!

[mkmg76]

In case anyone is curious, I'm getting Fault 000256, have replaced the sensor with a known good item and the problem persists so i'm thinking a break in the wire somewhere. I've peeled back the outer sheath and checked but there are no obvious signs of damage. All 3 terminals are showing Green (earth/ground) with a power probe when unplugged, wire 2 & 3 are showing green (earth/ground) when plugged in with wire 1 showing nothing.

I'm sure one should be red (live) when plugged in and the ignition on.

Looking to confirm this theory if anyone has a spare few minutes and wouldn't mind checking theirs.