How to, Midline to highline retrofit

[Antvw]

got my 973b clocks fitted in my 07 tdi yesterday....
only major issue that i can see is whether you have VDO or Visteon which seem to be harder to rewrite...
anyway kalu can sort them out...
great upgrade!!!

Done one yesterday for a forum member, as you say a great upgrade

That was me! Cheers eddie!

[kalu]

Just fitted a set of BAP Highline Scirocco R clocks in a MK5 R32. Properly adapted with working Immo :)

[Eddie-NL]

Good work Aftab

I supplied these and can get others

PM me for a price

[Redgtr]

In need of help please guys
I currently have 1k0920 951 b.  clocks in my golf tdi,need to change them as the fuel gauge has packed up so would like to upgrade to highline .could you tell me the parts I need and how to code hem all to my car
I have cruise control already but no multi function wheel or mfa
I live in South Wales
Any help would be great cheers jay

[Eddie-NL]

You can fit any diesel clocks from 2004 - 2009

1K092097* (* =) 1,2,3 or 4

You would require the stalk

[Shanny]

Hi, I have a golf 54 plate gt tdi, I do not know the number of my existing clocks, but I have purchased r32 clocks which end in 972 F
Will these fit in my car. The clocks are off a dsg car but mine s manual.
I'm in Manchester so I need to know if anyone can scan my car or check if they can fit.
Email shannykahn at yah*oo dot com
Remove *

[Shanny]

Hi, I have a golf 54 plate gt tdi, I do not know the number of my existing clocks, but I have purchased r32 clocks which end in 972 F
Will these fit in my car. The clocks are off a dsg car but mine s manual.
I'm in Manchester so I need to know if anyone can scan my car or check if they can fit

[jabberwokki]

Hi all, hope somebody can help have a 2004 mk5 golf 1.6fsi and after fitting a rns510 wanted to upgrade to a highline cluster i have vcds and vag commander 4.5 have managed to retreive the SKC from the old cluster and save a copy of the immo data using vag commander but new cluster i am struggling to read and write to cluster is a 1K0920974A after reading lots of threads on various site understand this is because original is immo4 and replacement is immo4c ...but also understand they can still be swapped can somebody point me in the right direction to either do myself or somebody in S.wales with the correct tool
many thanks

[dave1814]

Sorry to revive this thread - but i assume if you have any problems with the new cluster you can always put the old one back in and the car will start?

thanks!

[RetroRaz]

Sorry to revive this thread - but i assume if you have any problems with the new cluster you can always put the old one back in and the car will start?

thanks!

Yes it will.

Text me, i emailed you my number. I can answer all your queries regarding clusters

[mkmg76]

Used this excellent guide this weekend to fit and code a set of highlines into my car. 

Thank you OP. It was a great help. 

[dave1814]

Can anyone recommend a VAG commander on ebay which would work with a 2005 GTI?

Thanks!

[dave1814]

Hi guys, ive purchased a VAG commander cable which came with v1.4.

However, I can't seem to see the 'Read/write IMMO data' option - have i missed a step?

thanks,
Dave

[dronners]

Hi guys, ive purchased a VAG commander cable which came with v1.4.

However, I can't seem to see the 'Read/write IMMO data' option - have i missed a step?

thanks,
Dave

what years your car ?  sounds like you have a newer year that cant be read. think its only up to early 2006 probably says in this thread somewhere

[dave1814]

just sorted it - v1.4 didnt have the option, v3.6 didnt work but v2.5 seemed to do the trick!