Make a donation

Author Topic: ECS Dogbone Mount Insert  (Read 91824 times)

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
ECS Dogbone Mount Insert
« on: November 12, 2008, 01:58:56 pm »
ECS Dogbone Mount Insert

Why
Standard VW layout for engine mounts and composition of lower engine mount leads to excess engine movement under various conditions.
This insert fills the void in the standard lower mount , thereby removing some level of 'slack'.
Suits a std car , but is considered of greater use when additional torque from a remap is added.

Sourcing

Any good GTI tuner will stock these.
I got mine from Awesome GTI

http://www.awesome-gti.co.uk/product.php?xProd=6803&xSec=158



ECS Tuning is proud to release it's dogbone mount insert for the Mk5 platform. The ECS dogbone mount insert works with the OEM rubber bushing to provide a better more rigid connection between the transmission mount and subframe. Less movement in the system will result in smoother shifts and less engine movement under heavy acceleration. Made of a 70A Torque durometer. Kit includes dogbone insert, retaining washer, centering washer and new stretch bolt.

Around £25

I believe theres also a cheap link available from the USA

Fitting
Easy
Remove old bolt , lube up the new insert and fit.
Minimal charge from garage if you dont want to do it.
Only caveat is you need space under the car , so be SAFE!

Other versions
Various other forms of the dogbone are available from other tuners
e.g. Neuspeed (doesnt include the bolt) which can also be of varying rubber hardness.
I have also seen some metal based inserts but these are probably too hard to general road use.

A new bolt can be bought from VW , no concensus as to whether its a one time only stretch bolt or not (although ECS info above states it is!)

Plus Points
Considerably reduces engine movement under all conditions
Car feels tighter
May lead to reduced wheelspin and better control as transition from decel to accel can be made smoother.
Reduced wheel hop /axle tramp type vibrations
Fabulous cost/benefit ratio
Can easily be reversed if reqd
Vastly improves the clutch judder I used to have at the biting point


Minus Points
Does increase the level of vibration felt through pedals/handbrake , although this is very minimal.
For me its not even a consideration.

Summary
This is how it should have come from the factory : GET ONE :  :happy2:

« Last Edit: November 12, 2008, 07:26:05 pm by john_o »
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: ECS Dogbone Mount Insert
« Reply #1 on: November 12, 2008, 02:03:22 pm »
Nice write up John_o 


Any chance of that long awaited write up of the anti-lift kit. Cough cough.  :chicken:

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: ECS Dogbone Mount Insert
« Reply #2 on: November 12, 2008, 02:09:27 pm »

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Re: ECS Dogbone Mount Insert
« Reply #3 on: November 12, 2008, 02:17:52 pm »
 x 3  :happy2:

Got mine and Im very happy with it! No additional vibration either  :wink:

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: ECS Dogbone Mount Insert
« Reply #4 on: November 12, 2008, 11:31:09 pm »
x4, had them in both my GTi's and got 1 in the S3, cheap effective mod

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: ECS Dogbone Mount Insert
« Reply #5 on: November 13, 2008, 06:18:34 pm »


^^^^ Love the hand, TC!!

John - I have the Neuspeed version on DSG GTI and have experienced no vibration at all.




[Do you think I need new batteries? :evilgrin:]


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline bennylenny88

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 923
  • needs moar lowwww
    • Email
Re: ECS Dogbone Mount Insert
« Reply #6 on: November 14, 2008, 01:39:13 pm »
nicee i want one :(


2 x cerwin vega 15" subs and MTX 1000D amp with box and complete wiring for sale.. PM for details

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: ECS Dogbone Mount Insert
« Reply #7 on: November 14, 2008, 01:43:41 pm »
nicee i want one :(

....You can get one free if you buy a Milltek performance exhaust.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: ECS Dogbone Mount Insert
« Reply #8 on: November 14, 2008, 01:54:37 pm »
Hey thats not a bad deal is it, nearly a grand to stop engine movement.  :laugh: :laugh:

Offline bennylenny88

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 923
  • needs moar lowwww
    • Email
Re: ECS Dogbone Mount Insert
« Reply #9 on: November 14, 2008, 02:14:23 pm »
lol i do need a exhaust system though hmmm :P


2 x cerwin vega 15" subs and MTX 1000D amp with box and complete wiring for sale.. PM for details

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: ECS Dogbone Mount Insert
« Reply #10 on: November 14, 2008, 02:27:15 pm »
lol i do need a exhaust system though hmmm :P

Ok i will shut up and leave you in RedRobins capable hands good luck.  :rolleye:

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: ECS Dogbone Mount Insert
« Reply #11 on: November 14, 2008, 03:46:07 pm »



 

:evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin: :evilgrin:



On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: ECS Dogbone Mount Insert
« Reply #12 on: November 14, 2008, 03:51:04 pm »


^ This is what can happen without a Torque Insert - A broken exhaust mount bracket. It's surprising how much twist movement the GTI engine has.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline bennylenny88

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 923
  • needs moar lowwww
    • Email
Re: ECS Dogbone Mount Insert
« Reply #13 on: November 14, 2008, 07:55:05 pm »
mines a 1.4 thou :(


2 x cerwin vega 15" subs and MTX 1000D amp with box and complete wiring for sale.. PM for details

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: ECS Dogbone Mount Insert
« Reply #14 on: November 14, 2008, 07:56:15 pm »
The engine will still move about pal, maybe not so much, but it will move