Sorry it's been a while, again...
Let's try and do this in some order
I bought a very cheap set of Nankang AR1 245/40/18 from Chris McDermott, he'd only done a few laps on an evening session!
Next, I'd bought a new Ramair ProRam filter - Sadly myself and Eddie (who does my fab work) had a little communication error and the filter is on the big side. However, you'll see a little further on that it doesn't loom to bad in the end.
Bought some bits for the pipework that Eddie has done:
K03 to K04 DV loom
Some silicone bends etc.
MAP boss
Small K&N for custom catch can (not yet fabricated)
Here's the finished work by Eddie! Yes, titanium intake
Can also see here my Spal fans, aluminium rad and custom fan shroud.
Some pictures of the Golf on the ramp
After bleeding the clutch and brakes - I drove the car out the unit under it's own power!
Bought some things...
Spray booth for the unit
Also bought some cheap cars...
An A3 2.0tdi Quattro (snapped cambelt) I've broken it for parts and going to keep the Quattro set up for the golf for future
Bought a MK5 GTI DSG with a good spec, needing an engine which I also bought, fit engine, sell for profit.
Also bought a standard Polo GTI 9N3 that I was going to put a new gearbox in and sell on, but ended up giving to younger brother as a track toy
Anyway, back to the Golf - Mapping is booked at TSR for 13th October
before that, I'm hoping to get an alignment and MOT on it! Hopefully, my new Recaro SPG's will be here in time!
Thanks for reading
Sent from my iPhone using Tapatalk