What did you and your MKV do today?

Started by ROH ECHT, June 12, 2011, 03:07:21 AM

Previous topic - Next topic

r5gtt

Haha I still know it can be done without damaging the light so will try it one day  :scared:

JamieKirk95

Let me know how it goes :P

r5gtt

Will do when mine has lost its leds  :P

dools225

Quote from: r5gtt on April 04, 2017, 11:25:21 AM
Quote from: JamieKirk95 on April 03, 2017, 09:50:57 PM





looks like you got the complete brake light out without breaking it into pieces?. Well done  :happy2:

On my list as mine is fooked! Have already rotated the rear wash jet to stop it squirting right up at it!

ROH ECHT

New "Boot Pop kit" bump stops, only, arrived today...replacements for worn and broken pair...and got them installed. Picked up oil, filter, and cam follower for upcoming 135k service.
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

lukemk5gti

Quote from: ROH ECHT on April 07, 2017, 01:49:24 AM
New "Boot Pop kit" bump stops, only, arrived today...replacements for worn and broken pair...and got them installed. Picked up oil, filter, and cam follower for upcoming 135k service.

You also tackling the service over long Easter weekend?

I'll drop the sump and clean the pickup pipe while I'm doing the service.

pudding

Replaced the valve cover due to someone stripping out a PCV thread, and also the vacuum pump seal.

£120 in parts and about an hour to fit both.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

MIJ_JAGGER

Quote from: Pudding on April 07, 2017, 09:42:22 AM
Replaced the valve cover due to someone stripping out a PCV thread, and also the vacuum pump seal.

£120 in parts and about an hour to fit both.
Does the valve cover come with the bolts? Or are they ordered separately?

pudding

Quote from: MIJ_JAGGER on April 07, 2017, 09:48:00 AM
Quote from: Pudding on April 07, 2017, 09:42:22 AM
Replaced the valve cover due to someone stripping out a PCV thread, and also the vacuum pump seal.

£120 in parts and about an hour to fit both.
Does the valve cover come with the bolts? Or are they ordered separately?

A valve cover from VW comes with all the bolts, a new rubber drip ring for the oil filler and a new PCV gasket  :happy2:


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

MIJ_JAGGER

Quote from: Pudding on April 07, 2017, 10:01:28 AM
Quote from: MIJ_JAGGER on April 07, 2017, 09:48:00 AM
Quote from: Pudding on April 07, 2017, 09:42:22 AM
Replaced the valve cover due to someone stripping out a PCV thread, and also the vacuum pump seal.

£120 in parts and about an hour to fit both.
Does the valve cover come with the bolts? Or are they ordered separately?

A valve cover from VW comes with all the bolts, a new rubber drip ring for the oil filler and a new PCV gasket  :happy2:
Ta [emoji1303]

dazza

#10300
Found out today that the golf wont go down the drive of my new house FFS.  :doh:  :sad1:  :sick:





05 | Tornado Red | DSG

Rossimac


dazza

05 | Tornado Red | DSG

pudding

Went to sort my leaking rear washer today and discovered some previous owner hackings.

The dimwit cut a section of metal away and also cut a support arm off the wiper motor assembly  :congrats:

This precisely why people steer clear of modified cars.  I now need to buy a new motor and weld a studded piece of metal back on to support the motor.

Has anyone got a picture of what that area is supposed to look like as standard please?





2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

v4rley

#10304
 :grin:  :grin:  :grin:

@pudding

There is a reason it has been removed for a previous modification that must have been removed before resale..

http://www.mk5golfgti.co.uk/forum/index.php?topic=10027.0

Quote from: Pudding on April 08, 2017, 11:56:48 AM
Went to sort my leaking rear washer today and discovered some previous owner hackings.

The dimwit cut a section of metal away and also cut a support arm off the wiper motor assembly  :congrats:

This precisely why people steer clear of modified cars.  I now need to buy a new motor and weld a studded piece of metal back on to support the motor.

Has anyone got a picture of what that area is supposed to look like as standard please?